Huachenyang (Shenzhen) Technology Co., Ltd |
Verified Suppliers
|
|
10mL Painless Home Saliva Collection Kits Dna Saliva Collector
New painless home saliva collection kit dna saliva collector
Product introduction:
HCY Saliva Collection Kit is user-friendly designed for donor’s
DNA/RNA sample self-collection at home, which is an all-in-one
systemfor collection, stabilization, transportation, and storage of
RNA from saliva sample. This product collects saliva samples
secreted from the oral cavity through the collection tube, and
evenly mixes the collected saliva with the transport medium,
ensuring the integrity of the DNA/RNA in the saliva sample.
Product advantages:
1. Non-invasive, painless, easy to handle. Ideal for children
sample collection
2. Samples are non-infectious and can be shipped safely.
3. Self-collection, no need for a trip to a testing center.
4. Medical staff are not exposed to the risk of infection.
5. Unique funnel design prevents spillages or buffer flow back
Precautions:
①. Do not eat, drink, smoke, or chew gum within 30 minutes before
collecting saliva samples
② It takes 2 to 5 minutes for most people to collect saliva samples
according to the above steps.
③. Before starting to collect saliva, please relax your cheeks and
gently massage your cheeks with your fingers for 15-30 seconds to
produce saliva.
④. Confirm that the outer packaging of the saliva sample collection
tube is intact, and check the saliva storage tube to confirm that
there is no leakage. Important note: Saliva collection fluid cannot
be used!
⑤ Under room temperature storage conditions, saliva samples
collected by this product can be stored stably for 1 months, and
high-quality high-molecular-weight DNA fragments can be separated
within the shelf life. In view of the individual differences in the
samples, the specific shelf life of different samples fluctuates
product instructions:
①. Relax your cheeks and knead gently for 30 seconds to produce
saliva;
②. Gently spit about 2ml of saliva into the saliva collection
funnel;
③. Pay attention to avoid excessive foam when collecting saliva
(the upper foam is not included);
④. Open the DNA storage solution tube and unscrew the cap;
⑤ Pour the DNA preservation solution into the saliva collector, and
confirm that the layered interface between the liquid in the sample
collection and the upper foam reaches the scale line shown in 4ml;
⑥ Unscrew the collection funnel from the screw mouth of the saliva
collection device, and remove the funnel (remember to dispose of
the waste after use to avoid contact and pollution);
⑦. Tighten the cap of the tube on the sample collection tube, and
mix the liquid in the tube upside down, so that the DNA
preservation solution and the saliva sample are fully mixed to
complete the sample collection work.
Product Description:
Product name | Saliva collection kit |
Tube Volume | 10mL |
Medium Volume | 1/2/3mL |
Kit Component | Saliva funnel+5ml tube or 10ml tube |
Application | Specimen Collection, storage and transport |
Downstreams | Diagnostic labs, Hospitals, Clinical Use |
Feature | Specimen High Collection Rate,Rapid Elution, and Long-term Storage |
Tube Feature | Conical bottom, self-standing tube designed for storage and transportng biological specimen |
Disinfecting Type | OZONE/Irradiation |