Product Parameters:
Current DC1A
Voltage DC5V
Output power 3W+3W (4 ohms)
Signal to noise ratio 90dB
Efficiency >90%
Size 24*15.5*mm
Positioning hole size 20mm spacing
Aperture 2mm
Note:
1: The positive and negative poles of the power supply cannot be
reversed, and the power supply voltage cannot exceed 5.5V. These
two violations will cause the IC to be damaged.
2: There is a high gain buffer on the chip. It is not possible to
change any component parameters on the board. Non-conforming
parameters will cause IC damage.
3: Please use the shielded wire as much as possible for the input
line, which can play an anti-interference effect and eliminate the
clutter current.
4: The output is the BTL driving mode of the CMOS tube. The
negative poles of the left and right speakers cannot be connected
together, that is, the 4 lines connecting the horns are completely
independent, and are not allowed to be connected together!