|
[China]
Trade Verify
Address: West A - 413, Zhejiang University NATIONAL SCIENCE PARK No. 525 Xixi Road, Hangzhou, Zhejiang Province, China, 310013
Contact name:Tu mingqi
Hangzhou Hydrotu Engineering Co.,Ltd. |
|
Verified Suppliers
|
|
|
Small Impulse Turbine Turgo Hydro Turbine With Stainless Steel
Runner For Renewable Energy
Basic Parameter:
turbine type: Horizontal Turgo with one nozzle
Descrition:
The turgo turbine is a kind of impulse turbine and suited for heads
from 50m-250m, between Francis turbine and Pelton Turbine.
The feature is an angle of 22.5° is formed between the center line
of the nozzle jet and the rotational plane of the runner.
The water from the penstock is transformed into a high speed
jet through the nozzle. The water is directed obliquely to one side
of the runner and discharges at the other. The dynamic force of
water flow makes the runner rotate rapidly.
It consists main turbine runner, nozzle assembly, conduit
part, deflector control and hydraulic etc.
Turbine runner is the principle part of the turbine. runner
made of casting stainless steel. It has influence over the
characteristic of the turbine. The runner consists of vanes, the
hub and the outer ring of runner. The shape of vane is three
dimension camber. The outer ring applies to strengthen the runner
and to reduce the loss of wind.
The plane key set up between the runner and the main shaft in order
to transfer running torque. The elastic coupling is fitted on the
end of main shaft. The end of main shaft and the hole of coupling
are fitting and transfered the running torque by plane key.
Turgo turbine is characterized not only by high specific speed ,
high flow and even efficiency curve, but also by simple
construction, easy erection test and adjustment , reliable
operation, simple maintenance and low cost.
Turgo Turbine Applications:
1. Water head: 50m -- 250m
2. Capacity: 100KW -- 2000KW
3. Runner diameter: below1.5m.
4. Frequency: 50hz / 60hz
5. Generator Output voltage: 0.4KV, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interested in the Turgo turbine, you should send
some key parameters (such as net head, flow discharge, unit
number, frequency, voltage) in inquiry.
Water head range for Turgo Turbine selection.
Specifications:
Type | Horizontal Turgo turbine with one /two nozzles |
Water head | From 50m -- 250m. |
Installation capacity | From 100KW -- 2000KW |
Runner material | Stainless steel (0Cr13Ni4Mo) |
Generator type | Synchro generator |
Auxiliary Equipment | Governor, Inlet Valve, unit side panel, excitation system |
Competitive Advantage:
HYDROTU is the complete Chinese hydropower equipment supply,
consulting and engineering design venture in the field of
hydropower equipment. We provide the high quality Chinese
hydropower equipment with advanced technologies and integrated
services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with
customized support from project planning through implementation to
plant commissioning and service. Our principle: Customer’s project
is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic
solution of the global hydropower projects and aims to be the best
global supplier of hydropower equipment as well as the best
integrated services provider on the hydropower markets.
Our Factory is a special enterprise which manufacture
and researches Turgo turbine in China, the manufactory is the first
production of small Turgo turbine in China. Turgo
turbine runner use advanced casting technical
produced, Turgo turbine export to many countries such as
USA, Canada,Turkey, France, Serbia, Greece, Albania etc, won high
opinion and praise.
