Electric/Manual Drived Gate Valve / Sluice Valve
with Diameter 100 - 1600 mm
Gate valves is one of the most common open or close the valve, the
use of the gate is up and down to work full open and full close to
block fluid in the pipeline.
The gate is usually wedge shaped. When the valve is wide open, the
gate is fully drawn up into the valve, leaving an opening for flow
through the valve the same size as the pipe in which the valve is
installed. Therefore, there is little pressure drop or flow
restriction through the valve.
1. Two side of valve ends are flange bolts connection structure.
2. sealing surface of seat bead welding with the iron and chromate
nickel stainless steel, have a good performance on wear resistance
and scratch resistance.
3. There is nitriding process on Stem surface to resistance
corrosion, has good corrosion resistance and scratches resistance .
4. The valve open or close operation are controlled by the electric
device which installed on the head of valve. Electric device
equipped with electric motor, reduction gearbox, torque control
device, travel control device, the site operation device, and
hand-electric switching mechanism.
The valve working are control by the travel control device.
when the travel control device is failure in the case, torque
limit device can stop the motor, protects the valve. The valve
operation by electric device ,the adjustable wedge double disc,
grip ring and other parts, drive the stem up and down in the valve
5. Electric devices can local operate, and also can remote control
in the central room.
Motor-Driving/Manual control Gate Valve
Nominal Diameter: 100 – 1600 mm
Nominal Pressure: PN0.25 – 6.4 Mpa
HYDROTU is the complete Chinese hydropower equipment supply,
consulting and engineering design venture in the field of
hydropower equipment. We provide the high quality Chinese
hydropower equipment with advanced technologies and integrated
services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with
customized support from project planning through implementation to
plant commissioning and service. Our principle: Customer’s project
is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic
solution of the global hydropower projects and aims to be the best
global supplier of hydropower equipment as well as the best
integrated services provider on the hydropower markets.