Active Member
|
[China]
Address: Building No.4.Zhongtie Xicheng Third East Road of Guanghua, Qingyang District, Chengdu city,Sichuan,CHINA
Contact name:Nancy
Chengdu Forster Technology Co., Ltd. |
|
|
200 KW Alternative Water Power Hydro Francis Turbine Generator
Francis Water Turbine Generator Feature:
Francis turbines may also be used for pumped storage, where a reservoir is filled by the turbine (acting as a pump) driven by the generator acting as a large electrical motor during periods of low power demand, and then reversed and used to generate power during peak demand. These pump storage reservoirs, etc. act as large energy storage sources to store "excess" electrical energy in the form of water in elevated reservoirs. This is one of only a few ways that temporary excess electrical capacity can be stored for later utilization.
| Application | Francis Water Turbine Generator |
| Water head | 15-70 m |
| Output | 0.05 ~ 30MW |
| Frequency | 50/60HZ |
| Runner diameter | 0.5 ~ 10m |
| Life Span | 30-50 years |
Product Introduction
1. Francis turbine generator has the advantages of compact structure, high efficiency, can adapt to a wide range of water head of turbine type, is one of the widely used around the world.
2. Francis turbine generator is a kind of turbine suit to water head 50-400meters and with certain suitable flow.
3. Francis turbine generator could be divided into vertical and horizontal arrangement.
4. Francis turbine generator have the advantage of high efficiency, small size and reliable structure.
Francis Water Turbine Generator Parameters:
| Power Range | 180-800KW |
| Water Head | 15-40 m |
| Flow Rate | 1.43 m3/s - 2.34 m3/s |
| Material | Steel plate/Stainless steel |
| Speed range | 500-750 rpm |
| Installation method | Horizontal installation / vertical installation |
| Frequency | 50hz/60hz |
| Efficiency | 89%-92% |
| Guide vane | Counter Weight |
| Application | On-grid/Off-grid |
Francis Water Turbine Generator Pictures:
Other Prosucts
| Low Head High Flow | High Head Low Flow |
 |  |
| Power 450-1700 KW | Power 1000-5000KW |
| Water Head 6-15 m | Water Head 250-440m |
| Flow Rate 8.4-12.64 m3/s | Flow Rate 0.51-1.14m3/s |
| Advantage | Advantage |
1. Kaplan water turbine generator suitable for water head below 25m.
2. The hydraulic loss of the passage is reduced and the construction is convenient.
3. Kaplan water turbine generator suitable for reversible pump-turbine operation, has good hydraulic performance.
4. Kaplan water turbine generator suitable for comprehensive development and utilization of low head hydraulic resources. | 1. Turgo water turbine generator mainly by the nozzle and runner, and so on.
2. The turgo water turbine generator has the advantages of simple structure, low cost and low efficiency.
3. Horizontal turgo water turbine unit has the advantages of a simple structure, easy maintenance, reduce plant height, reduce the excavation depth.
4. Turgo water turbine unit can install multiple nozzles on the wheel,high specific speed, the same capacity unit size is relatively small and weigh lightly. |
Our Main Products Included:
(1) Efficititive Francis turbine. (2) High head Pelton turbine. (3) Simple structure Kaplan turbine. (4) Tubular turbine. (5) Turgo turbine. (6) Other supporting equipment. |
Why Choose Us
1.We can provide the complete equipment, including: Water Turbine, Generators, Inlet Valve, Governor, Computer Control Panel, and other ancillary equipment.
2.Our production ability and quality of Water Turbine are very excellent.
3.We have Microcomputer digital speed governor.
4.Our Low voltage (400V) Generator can be controlled by microcomputer monitor system.( A key to boot, and a key off)
5.Our Microcomputer XCR Excitation Panel is automatic controlled and can monitor temperature, rotate speed, water level, electric current, and voltage automatically.
Q1, Which turbine generator should I choose? Our products are all customized, so please tell me your water head, flow rate, frequency, total power, voltage, on grid or off grid operation, we will make a suitable solution for you. Q2, Can your factory provide all the equipment for turbine generator? Yes, we can provide you with hydro turbines, hydro-generators, pressure regulators, water turbine wheels, control panels, transformers, monitoring systems and more. |
Q3, How about your products' quality? We have a very strict quality controlling system which promises that goods we produced are always of the best quality, and our products have sold in 50 areas abroad. They are very popular with the users there. Q4, Do you have own factory? Yes we have. We are a manufacturer of hydro turbine generators and have own factory. We started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China. |
Q5, How to order? Q6, How long is the delivery time? Delivery times range from 15 days to 6 months depending on which hydro turbine generator you are purchasing. Q7, How to transport the goods? |
| Q8, After-sales Service? 1 year warranty for all kinds of products. If you find any defective accessories first time, you can contact me, we will give you a best solution, as an experienced manufacturer, you can rest assured of the quality and after-sales service. |
1.Flow rate ( lit/sec or m³/sec?) 7. Voltage of transmission line if it is on grid( V?) |
Our Water turbine generators are all customized products. We could design water turbine generator according to your requirement. Could you give us the following parameters so that we could make a professional solution for your project.
By the way,could you tell me your whatsapp number(phone number) ?
