Active Member
|
[China]
Address: Building No.4.Zhongtie Xicheng Third East Road of Guanghua, Qingyang District, Chengdu city,Sichuan,CHINA
Contact name:Nancy
Chengdu Forster Technology Co., Ltd. |
|
|
Alternative Hydro Water Power Tubular Turbine Generator For High Flow
Tubular Turbine Generator Feature:
The Tubular type turbine generators are usually the best choices for exploitation of tidal power and hydraulic power with extremely low heads and extremely large flow rates.
Tubular turbine generator have the advantages such as large discharge, high flow speed, high efficiency and less excavation, etc. Their variations have Bulb, Pit, Siphon and S types according to their structural types. The water diversion parts, runner and water drainage parts of Tubular turbine are on one axial line. The water flow directly and straightly through the runner without spiral casing. The water flow is axial from the pipe inlet to the draft tube outlet.
Tubular turbine generally has two categories: fully tubular and half tubular. The half Tubular turbine is divided into bulb, pit and shaft extension types, etc.
Applications:
1. Water head: 2m - 25m
2. Power: 0.6 kw - 30000KW
3. Frequency: 50/60hz
4. Generator Output Voltage: 0.4KVV, 6.3KV, or 10.5KV AC three phase,
We can supply tubular turbine generator above 500KW till 30MW,
supply the runner with Forge and CNC machine, or runner with cast
abrading machine for your require.
Product Introduction
1. Tubular turbine suitable for water head below 25m. There are fixed oars and rotary oars. The water-passing capacity and hydraulic efficiency of the unit are greatly improved.
2. The hydraulic loss of the passage is reduced and the construction is convenient. It has high efficiency and its draft tube recovery function can account for more than 40% of the total water head.
3. Tubular turbine suitable for reversible pump-turbine operation, has good hydraulic performance.
4. Tubular turbine suitable for comprehensive development and utilization of low head hydraulic resources.
5. The tubular hydro power station construction cycle is short, the investment is small, the effect is quick, submerges the Immigration to be few.
Tubular Turbine Generator Parameters:
| Power Range | 500-1700 KW |
| Water Head | 6-15 m |
| Flow Rate | 8.4 m3/s - 12.64 m3/s |
| Material | Steel plate/Stainless steel |
| Speed range | 250-375 rpm |
| Installation method | Horizontal installation / vertical installation |
| Frequency | 50hz/60hz |
| Efficiency | 89%-92% |
| Guide vane | Counter Weight |
| Application | On-grid/Off-grid |
Other Products
| Kaplan Turbine Generator | Francis Turbine Generator |
 |  |
| Power 450-1700 KW | Power 1300-4200 KW |
| Water Head 6-15 m | Water Head 48-89 m |
| Flow Rate 8.4-12.64 m3/s | Flow Rate 3.21-5.03 m3/s |
| Advantage | Advantage |
1. Kaplan turbine generator suitable for water head below 25m. There are fixed oars and rotary oars. The water-passing capacity and hydraulic efficiency of the unit are greatly improved. 2. The hydraulic loss of the passage is reduced and the construction is convenient. Kaplan turbine generator has high efficiency and its draft tube recovery function can account for more than 40% of the total water head. 3. Kaplan turbine generator suitable for reversible pump-turbine operation, has good hydraulic performance. Suitable for comprehensive development and utilization of low head hydraulic resources. | 1. Francis turbine generator has the advantages of compact structure, high efficiency, can adapt to a wide range of water head of turbine type, is one of the widely used around the world.
2. Francis turbine generator is a kind of turbine suit to water head 50-400 meters and with certain suitable flow.
3. Francis turbine generator could be divided into vertical and horizontal arrangement. Francis turbine generator have the advantage of high efficiency, small size and reliable structure. |
Our company is found in 1956, our factory in hydro power products has continuously been one of the national strategic turbine manufacturers in China since year 1997. We have certification of ISO9001, TUV and CE.
We have designed, manufactured and installed successfully over 200 Hydroelectric Power Stations in Albania, Chili, Congo, India, Lithuania, Kazakhstan, Vietnam, Zambia and other overseas markets.
The equipment adopted for those hydro power projects are unit-capacity from 0.6KW to 30MW. All the completed stations are now maintaining their peak performance after their installations.
Main Products Included:
(1) High efficiency Francis turbine generators series.
(2) High head and low flow Pelton turbine generators series.
(3) Vertical shaft device Kaplan water turbine generators series.
(4) Bulb type and Shaft Extension type Tubular water turbine generators series.
(5) Single or double nozzleTurgo water turbine generators series.
Q1, Which water turbine generator should I choose?
Our products are all customized, so please tell me your sepecific parameters: water head, flow rate, frequency, total power, voltage, on grid or off grid operation, we will make a suitable solution for you.
Q2, Can your factory provide all the equipment for turbine generator?
Yes, we can provide you with water turbines, hydro-generators, pressure regulators, water turbine wheels, control panels, transformers, monitoring systems and so on.
Q3, Do you have own factory?
Yes we have. We are a manufacturer of water turbine generators and have own factory. We started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q4, What's minimun quantity of an order of your product?
For our all products, our acceptable minimun order is 1 set.
Q5,How to order?
Step 1, Please tell us what model and quantity you need, because
our products are all customized;
Step 2, Then we will make a PI for you to confirm the order
details;
Step 3, When we confirmed everything,you can arrange the payment;
Step 4, Finally we deliver the goods within the stipulated time.
Q6,How long is the delivery time?
Delivery times range from 30 days to 6 months depending on which water turbine generator you are purchasing, we will deliver the goods as soon as we can.
Q7, After-sales Service?
1 year warranty for all kinds of products. If you find any
defective accessories first time, you can contact me, we will give
you a best solution, as an experienced manufacturer, you can rest
assured of the quality and after-sales service.
Our Turbine generators are all customized products. We produce water turbine generator according to your specific needs. Could you give us the following parameters so that we could make a professional solution for your project.
1.Flow rate ( lit/sec or m³/sec?)
2.Water head ( m?)
3.Total power ( KW?)
4.Frequency ( 50 hz or 60 hz?)
5. Voltage( V?)
6. On grid or off grid?
7. Voltage of transmission line if it is on grid( V?)
8. Elevation (MSL)
9. Is it clean fresh water(with our sand, stone and silt ect,.)
By the way,could you tell me your whatsapp number(phone number) ?
