Wuxi Smart CNC Equipment Group Co.,LTD |
Verified Suppliers
|
|
Hydraulic Iron Worker/Punch Cutting Machine/Iron Rod Cutting Machine Q35Y-50
1. Shearing Station:
a. Round & square bar shearing: there are multiple holes for a
varity of sizes. Adjustable hold down device is convenient for
shearing various sizes of round and square bar, channel, joist, etc
b. Flat bar shearing: large 15" squraing arm with inlaid scale as
standard equipment. Special anti-disorted blade for quality
cutting. Lower blade has four usage edges. There is screw allow for
gap adjust no shim needed..
c. Angle iron shearing: the angle iron shear has the ability to cut
angle iron at 45 degrees & 90 degrees withe diamond shaped
blade. e.g.This gives the operator the ability to make a picture
frame corner for perfect welds.
d. Diamond shaped blade for quality cuts that is minimal material
wast. Easily adjustable hold-down device for accurate plate
cutting.
2. Punching Station:
a. Largw viewing window on stripper.
b. Swing-away dwsign for easy operation.
c. Available unique style allows for large angle iron
punching and large channel punc. Fully protected electrical
hardness for safety and reliability.ching.
d. Quick change coupling nut and sleeve for rapid replacement
change
e. Large two pieces gauging table with rules and stop as
standard equipment.
3. Notching Station:
a. Unique design for unsurpassed cutting of angle and flat
bar.
b. Electrical interlock safety guard and three gauging stops
for precise positioning.
c. with ventilated device for good visibility.
d. The notching station also has an oversized table with
material stops.
4. Electronic backgauge device:
a. With 3 supporting feet.
b. Finb. Fine adjustment assures precision cuts.e adjustment
assures precision cuts.
c. Fully protected electrical hardness for safety and
reliability.
d. Large contact button for high efficiency productivity.
Specification
Model | Q35Y-12 | Q35Y-15 | Q35Y-16 |
Pressure(Ton) | 45 | 55 | 60 |
Max.cutting thickness(mm) | 12 | 15 | 16 |
Plate strength(N/mm2) | ≤450 | ≤450 | ≤450 |
Cutting angle(degree) | 7° | 7° | 7° |
Shearing size of one stroke(mm) | 12x250 | 15x300 | 16x250 8×400 |
Ram stroke(mm) | 60 | 60 | 80 |
Cycles/min(20mm stroke)(mm) | 8 | 8 | 8 |
Throat depth(mm) | 200 | 200 | 300 |
Punching thickness(mm) | 12 | 15 | 16 |
Max.Punching diameter(mm) | 22 | 24 | 25 |
Power of main motor(kw) | 3 | 4 | 4 |
Overall dimensions(L*W*H)mm | 1200x520x1500mm | 1320x590x1620mm | 1640x730x1770mm |
Weight of machine(kg) | 1000 | 1400 | 1600 |
Model | Q35Y-20 | Q35Y-25 | Q35Y-30 | Q35Y-40 |
Pressure(Ton) | 90 | 110 | 140 | 200 |
Max.cutting thickness(mm) | 20 | 25 | 30 | 40 |
Plate strength(N/mm2) | ≤450 | ≤450 | ≤450 | ≤450 |
Cutting angle(degree) | 8° | 8° | 8° | 8° |
Shearing size of one stroke(mm) | 20x330 10×480 | 25x330 16×600 | 30x355 20×600 | 35x400 25×700 |
Ram stroke(mm) | 80 | 80 | 80 | 100 |
Cycles/min(20mm stroke)(mm) | 8 | 6 | 6 | 8-25 |
Throat depth(mm) | 355 | 400 | 600 | 600 |
Punching thickness(mm) | 20 | 25 | 26 | 35 |
Max.Punching diameter(mm) | 30 | 35 | 38 | 41 |
Power of main motor(kw) | 5.5 | 7.5 | 11 | 15 |
Overall dimensions(L*W*H)mm | 1860x800x1900mm | 2355x960x2090mm | 2680x1040x2300mm | 2850x1300x2400mm |
Weight of machine(kg) | 2500 | 4500 | 6800 | 9500 |