Hydraulic NC Press Brake 800KN Good Rigidity With E21 NC Control System

WC67K-80/2500 NC Hydraulic Press Brake With E21 NC Control System From China Factory And Manufacturer

Standard configuration:

1.  The whole machine is in sheet plate weld structure, with inrernel stress eliminated by vibration aging technology, high strength and good rigidity of machine.

2.  Double hydraulic oil cylinder is applied for upper transmission, provided with mechanical limit stopper and synchronous torsion bar, typical of stable and relible operation, as well as high precision.

3.  Electrical control and manual fine-tuning mode are adopted for distance of rear stopper and stroke of gliding block, and fitted with digital display device, easy and quick in use.

4.  Upper die is fitted with deflecion xompensation device.

5.  Special numeric-control syetem is fitted with mainframe of the bending machin.

6.  Multi-work-step programming function is able to achieve an automatic operation and continous positioning of multi-step procedures, as well as an automatic precision adjustmemt for position of rear stopper and gliding block.

7.  The machine is provided with bend counting function, for a real-time display of processing quantity and power-failure memory of positions of stopper and gliding block, as well as procedures and parameters.

8.  Imported ball bearing lead screw and linear guide rail are used for rear stopper, to ensure the positioning precision of rear stopper, for processing precision of machine to be higher.

2.  Standard Equipment:

- Estun E21NC control System

- Powered Depth Y-axis&Back gauge X-axis

- DELTA Inverter controlled back gauge

- HIWIN Ball screws & Polished rod with 0,05mm accuracy.

- Plate Support Arms

- Germany Bosch-Rexroth Hydraulic

- Germany EMB Tubing connector

- Germany Siemens Main Motor

- Tele mecanique/Schneider Electrics

- Hydraulic &Electrical overload protection

- Top and Bottom Tooling(86°,R0.6mm)

- Safety Standards(2006/42/EC)

3. Safety Equipment:

1. EN 12622:2009 + A1:2013 2.EN ISO 12100:2010 3.EN 60204-1:2006+A1:2009

- Front finger Protection(Safety light curtain)

- South Korea Kacon Foot Switch(Level 4 of safety)

- Back metal safe fence with CE standards

- Safety relay with Monitor the pedal switch and safety protection

4.  Estun E21 NC Control system:

- Back gauge and block control

- Control for general AC motors,frequency inverter

- Intelligent positioning

- Stock counter

- Holding/decompression time setting

- Program memory of up to 40 programs Up to 25 steps per program

- One side positioning

- Retract function

- One key backup/restore of parameters

- mm/inch

- Chinese/English

WC67Y/WC67K Series Technical Parameters

Note: No notice if any changes of the above statistics made.