High Precision Manual A3 Binding Machine Plastic Tank Heated Touch LCD Display

A3 / A4 book binding machine, perfect book binding machine with dual rail

High precision hardcover book binding machine

Note the use of glue binding machine:
1, to avoid the simultaneous operation of two machines;
2, please do not replace the cutter itself, to prevent the phenomenon of paper off the glue binding process.
3, cutter for when the action starts, but as usual wishing cutter cover is open, press the emergency stop button when;
4, plastic tank heated to high temperatures, the temperature of about 170-190 ℃, can not touch;
5, maintenance in order to avoid electric shock, unplug the plug;
6, when the hot melt adhesive reaches the bottom of the black line indicates the board, shall be added;
7, when added directly into the plastic glue tank, glue not exceed the top of the black line, so as not to overflow plastic tank outside cause parts damage.

Wireless glue binding machine for use as following:

Process glue binding machine encapsulated books can be divided into six steps, as follows:
1, turn on the power, the hot melt is heated 30 minutes, the start button will light after heating is completed;
2, with plastic cover and adjust the thickness of the pressure and time according to the cutter open (manual mode);
3, plastic equipment required for the paper neatly into the post stamp set this station automatic clamping device, press the start button, clamps left, after a stop in the left side milling cutter;
4, according to the instructions on the cover clamp, will cover a compromise in place, press the start button;
5, calipers from the left to the right through the cutter stopped gluing, clamping clip to lift the cover of the unit carried out with plastic;
6, plastic equipment is completed, remove it.

Specifications

DB-50R A4 Wireless glue binding machine, perfect book binding machine

DB-50R wireless glue binding machine without side glue

Bookbinding is the process of physically assembling a book from a number of folded or unfolded sheets of paper or other material. It usually involves attaching a book cover to the resulting text-block. Before the computer age, the bookbinding trade involved two divisions. First, there is stationery or vellum binding which deals with making new books intended to be written into, such as accounting ledgers, business journals, and guest log books, along with other general office stationery such as note books, manifold books, portfolios, and etc. Second is letterpress binding which deals with making new books intended to be read from and includes fine binding, library binding, edition binding, and publisher's bindings.A result of the new bindings is a third division dealing with the repair, restoration, and conservation of old used bindings. With the digital age, personal computers have replaced the pen and paper based accounting that used to drive most of the work in stationery binding. Today, modern bookbinding is divided between hand binding by individual craftsmen versus mass-produced bindings by high speed machines in a bindery factory.