Technical data of terminal crimping machine high pressure hose
1.Crimper range: 1/8''~2" 4sp
2.Standard voltage&motor: 380V/4KW
3.Opening without dies: 122mm
5.Swaging force: 5300KN
6.Optional voltage&motor: 220V/2.2KW
7.No.of standard die: 10 sets
8.Systematic pressure: 31.5Mpa
The introduce of high pressure rubber hose crimper machine
high pressure rubber hose crimper machine is the metal joint
through the hydraulic machinery and corresponding mould and high
pressure hose colse withhold together ,make high pressure hose and
fluid fittings ,referred to as high pressure hose assembly .High
pressure hose assembly is widely used in oil field ,coal mine,
aerospace ,engineering machinery ,agricultural machinery ,etc.
Now ,the steps to use our high pressure rubber hose crimper
1. highpressure rubber hose crimper machine first-time users should be
unloaded when crimping 20-30 ,observing all parts properly before
------2.Thehigh pressure rubber hose crimper machine should be used during the
winter to be empty withhold 20-30 in order to increase the oil
3.Pressthe open button, die after opening ,depending on the crimping hose
specification choose die appropriate stencil is install on seat
,and adjust the micrometer scale.
------4.Theconnector hose under pressure well in the proper position in the
nose,making a withholding of full length.
5.Withholdingbutton is pressed to withhold action until pressure pipe until stop
withholding automatically open stencils in the nose.
------6.Removewithhold good hose assembly ,after withholding using Vernier
caliper fitting jacket diameter dimensions ,such as conformity with
the parameters should fine-tune the micrometer scale ,till a rubber
tube under custody to meet the requirements.
About the steps to use high pressure rubber hose crimper machine,we
can supply the video ,if you want to take a look at these steps ,