Active Member
|
[China]
Address: Room 1109, Loft Office, Green Land International Plaza, No. 275-8 Guoding East Road, Shanghai 200433, P.R. China. (admin(a)shunitesteel.com)
Contact name:Eric
SHANGHAI UNITE STEEL |
|
|
ASTM 519 8630Mod alloy steel bar
General-purpose pipe manufactured to ASTM Specification 519
Widely used in oil-patch applications such as connectors, hangers and block valves. Higher strength levels can be achieved by suitable heat treatment, but these are not NACE MR0175 approved.
Available in bar dimensions of 50.8 mm (2") to 762 mm (30")
Length range up to 6.1 m (20'
| C | Mn | Mo | Cr | Ni | Cu | Ti | P | S | Si | V | Al | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | 0.280 | 0.700 | 0.350 | 0.400 | - | - | - | - | - | - | - | - |
| Max | 0.330 | 0.950 | 0.450 | 0.600 | 0.900 | - | - | 0.035 | 0.040 | 0.350 | - | - |
| Tensile Strength | 655 MPa min | 95,000 psi min |
| Yield Strength | 517 MPa min | 75,000 MPa max |
| - | - | |
| Total Elongation Under Load | 17.000 % | - |
| Hardness | 22 Max HRC | - |
