Active Member
|
[China]
Address: Room 1109, Loft Office, Green Land International Plaza, No. 275-8 Guoding East Road, Shanghai 200433, P.R. China. (admin(a)shunitesteel.com)
Contact name:Eric
SHANGHAI UNITE STEEL |
|
|
Turned round bar, Turned bar, Machined round bar, Machined bar, Cold Finished Bar
Common alloy Material:
15CrMo,20CrMo,30CRMO/35CRMO,42CrMo,SAE4140,40CrNiMoA,SAE4340,20CrMnMo,40CRMNMO,16MnCr5,20MnCr5,22CrMoH,20CrMn,15CrMn,20CrMnTi,38CRMOAL,8620,20CrNiMoA,SAE6150,20CrNiMo,40CrNiMo,34CrNiMo6,17CrNiMo6,18crnimo7-6,40CrNi2Mo,20CrNi2Mo,17Cr2Ni2Mo,34CrNi3Mo,4145H,4137H.
Carbon Round bar material:
1010,1045,1020,1035,S45C,S35C,S20C.
Alloy Round bar material: 38CrSi,30CrMnSiA,18Mn2CrMoBA,12CrNi3A,12Cr2Ni4A,20Cr2Ni4A,18Cr2Ni4WA,25Cr2Ni4WA,34CrNi3Mo,25CR2MOVA,25CR2MO1VA,2Cr13,3Cr13,4Cr13.
Drill steel material:
18CrNi3MoA,20CrNi3MoA,25CrNi3MoA,22SIMnCrNi2MoA,24SiMnCrNi2MoA,35SiMnCrNi2MoVA ,Q45NiCrMoVA.
Spring steel material:
65Mn,60Si2Mn,50CrVA,SUP9,SUP10
Tool steel material:
H13,3Cr2W8V,D2,O1,D6,1.2311,1.2738,1.2344,S136
Size range:
Dia: 80-800mm
Length Random Length, Fixed Length, etc.
Certificate of Quality:
ISsued in English, in addition the normal terms, production process, the mechanical property yield strength, tensile strength, elongation and hardness, forged ratio, UT test result, Grain size, heat treatment methods and the sample of is shown on the Certificate of Quality.
Packing:
Plastic reel shaft, and bound, iron wire frame, the paper barrel etc
Our production processing & quality control:
Material cost control
Raw Material-----hot rolled steel billets are made by ourselves
----saving 5% cost on material.
Mass production;
There are more than 10 hot rolled angle steel production line, with
the monthly output of 100,000 tons carbon stee round bars
Insuring the control of production cost and shortest lead time.
