Active Member
|
[China]
Address: Room 1109, Loft Office, Green Land International Plaza, No. 275-8 Guoding East Road, Shanghai 200433, P.R. China. (admin(a)shunitesteel.com)
Contact name:Eric
SHANGHAI UNITE STEEL |
|
|
AISI4145H/SCM445 /50CrMo4/din 1.7228 forged steel shaft for
mechnical purpose, OD: 80-1200mm
Typically used in oil and gas applications, Castle Metals stock Alloy 4145 in round bar, hollow bored bar and Stabilizers, from their warehouse in Blackburn, UK.
4145 is available in sizes 3.25” – 24”, fully certified to API 7-1, quenched and tempered with hardness 30 to 36HRc. Stabilizers made specifically to requirements.
Alloy 4145 is used in a number of applications including drill collars, pup joints, subs and various other down hole tool products
Alloy 4145 is a Chrome / Moly alloy displaying high hardenability and good hardness penetration qualities. When heat treated, Alloy 4145 can be machined relatively effectively despite this well-known hardening grade maintaining its properties at very high temperatures! What makes Alloy 4145 harder than Alloy 4140 is the increased use of carbon applied to Alloy 4145.
Customers requiring even higher hardenability properties, particularly those operating within the Oil & Gas sector, may look to deploy Alloy 4145 MOD, as opposed to standard Alloy 4145, due to the increased amount of Mn, Cr or Mo used within to further strengthen the alloy.
Chemical composition
| C | Si | Mn | P | S | Cr | Mo |
| 043-0.49% | 0.10-0.35% | 0.85-1.10% | ≤0.035% | ≤0.040% | 0.80-1.10% | 0.15-0.25% |
Equivalent Steel Grade
| DIN | ASTM A29 | JIS G4105 | GB | EN ISO 10250 |
| 1.7228 | 4145 | SCM445 | 50CrMo4 | 50CrMo4 |
Mechanical Properties
Tensile Strength (MPA) | Yield Strength (MPA) | Reduction (%) | Elongation (10%) | Impact Strength (Aku2/J) | Hardness (HB) |
| 1000 | 880 | 17 | 50 | 80 | Anneal≤270HB Q+T 30-36HRC |
Process: EAF+LF+VOD+Forged+Heat Treatment(optional)
Annealed:(Metallurgy) to temper or toughen (something) by heat treatment
Normalized:To remove strains and reduce coarse crystalline structures in (metal), especially by heating and cooling.
Quenched: To cool (hot metal) by thrusting into water or other liquid.
Tempered: Having the requisite degree of hardness or elasticity. Used of glass or a metal.
SIZE RANGE:
Round:
Hot Forged: 80mm -1200mm
SURFACE FINISHES:
Black, Turned & Polished
Test: Ultrasonic test according to SEP 1921-84
