Active Member
|
[China]
Address: Jindu Industrial Park, Huanggang Village, Houjie Town, Dongguan City, Guangdong Province.
Contact name:Marco Lee
Dongguan Jiazheng Hydraulic Technology Co, LTD |
|
|
CRO Series 14Mpa Round Hydraulic Cylinder Push Pull Linear Hydraulic Motor Carbon Steel
Feature:
1. Employ high quality oil seal to prevent leakage , long pressure maintaning time and life span.
2. Carbon steel or stainless steel are available for the cylinder body , strong and durable structure.
3. Multiple mounting types to clients' requirements.
4. Special hydraulic cylinder can be customized by clients' applications
| NO | Part name | QTY | NO | Part name | QTY | NO | Part name | QTY |
| 1 | Piston rod | 1 | 10 | Spring washer | 2 | 18 | Half snap ring | 2
|
| 2 | Dustproof seal | 1 | 11 | Nut | 1 | 19 | Copper piston | 1 |
| 3 | Oil seal for shaft | 1 | 12 | Rod nut | 1 | 20 | Magnet ring | 1 |
| 4 | Guidance tape | 1 | 13 | Rod cover | 1 | 21 | O Gasket | 1 |
| 5 | Gasket | 1 | 14 | Lock Nut | 1 | 22 | Baffle Ring | 1 |
| 6 | Gasket | 1 | 15 | Cylinder tube | 1 | 23 | Washer On Shaft | 1 |
| 7 | Gasket | 1 | 16 | Piston | 1 | 24 | Lock Nut | 1 |
| 8 | Piston seal | 2 | 17 | End cover | 1 | 25 | Adjustable Nut | 1 |
| 9 | Wearing ring | 1 |
Specification:
Bore of cylinder (mm)
| Φ40
| Φ50
| Φ63
| Φ80
| Φ100
| Φ125
|
| |
| Power Fluid | Filtered Oil | |||||||
| Material of cylinder | Carbon steel STKM-13c/ tainless tubes SUS 304/AL Tube A6063TDS-T5 | |||||||
| The range of pressure(mpa) | 0.3-7.0 MPA(3-70kg/Cm2) | |||||||
| The range of speed (mm/sec) | 8~300(mm/sec) | |||||||
| Range of temperature (°C ) | -10 ~ + 60 (°C ) | |||||||
| Length of standard piston (PM) | 30 | 35 | 35 | 50 | 60 | 70 | ||
| Piston length when the stroke is between 1501-2500 mm | 60 | 70 | 70 | 100 | 100
| 120
|
| |
Piston length when the stroke is between 2501-4000 mm | 90 | 100 | 100 | 150 | 180 | 200 | ||
Ordering Code
CROB R D - 63 / 35 * 100 LB + Y
1 2 3 4 5 6 7 8
| 1 | Series |  |
| 2 | Magnetic | Blank: No magnet Z:Magnet |
| 3 | Flxed Cushioning Type | Blank: No cushion D: cushions on both ends F: cushion on head cover B: cushion on end cover |
| 4 | Bore of Cylinder | Φ40 ,Φ50 ,Φ63 ,Φ80 ,Φ100,Φ125 |
| 5 | Rod | Standard Φ20 Φ25 Φ35 Φ40 Φ50 Φ60 Max Φ25 Φ30 Φ40 Φ50 Φ70 Φ80 |
| 6 | Stroke | Steel barrel(Φ30-Φ125) Max:4m Iron barrel(Φ40-Φ100) Max:2.8m |
| 7 | Cylinder Body Accessories |  |
| 8 | Rod Accessories |  |
Remark : The sizes of the hydraulic cylinder can be customised by customer's requirements.
