Technologies Support:
The technologies are complete from OEM project of top rough
terrain truck specialist in USA. With the most advanced
technologies and manufacturing platform in the world.
Feature:
Built Specifically For Rough Terrain Work
- Single center bar and wide, open design give an improved view of
the fork tips.
- Six load rollers assure smooth movement.
- Four side-thrust rollers absorb lateral loads, contributing to long
carriage life.
- Four bronze pads curb carriage rattle when traveling without a
load.
- Optional side-shift carriage offers additional load handling
precision.
Tough, Productive Masts
- Standard and Full Free Lift Triple masts for all models.
- Lift heights from 10 to 30 feet (3 to 9 m).
- Wide stance provides a rigid structure that resists bending
stresses.
- Combination roller/polyethylene block design results in a
smooth-operating, easily-adjusted mast.
- Forward tilt limit control helps to avoid tilting to an unsafe
position. Override switch allows a tilt of more than 5° for
transport only, . Back tilt not affected.
Responsive Hydraulics Speed Your Work
- Gear pump supplies up to 23 gal (87 liters) a minute.
- Priority flow to steering for less steering effort.
- Stackable control valve makes it easy to add sections for
attachments.
- Anti-cavitation valve assures smooth operation of the tilt circuit.
- Flow control valve provides controlled descent if the lift circuit
fails.
- Replaceable 10-micron filter helps maintain clean fluid for longer
hydraulic component life.
More Lifting Capacity In High Lift
Noble Rough Terrain Lift Trucks retain more lifting capacity in
high lifts than other rough terrain trucks. This means fewer lifts
with heavy loads. Sometimes you may be able to use a smaller truck
for your application.
(Ratings are to American National Standards Institute (ANSI)
B56.6-1993, Part III, Safety Standards for Rough Terrain Fork Lift
Trucks. They are for lift trucks with standard drive tires.
Capacities in pounds are based on a 24-inch center; those in
kilograms on a 500 mm load center.)
Easy For Your Operator To Do The Job
- Power shuttle transmission lets the operator change directions
on-the-go (up to 5mph/8kmh).
- Inching pedal allows the truck to ease forward at full engine speed
and precisely place a load.
- Compact size and a tight turning radius help your operator maneuver
easily on crowded job sites. Low-effort power steering minimizes
operator fatigue.
- Spring mounting of the steer axle helps absorb road shock,
providing a comfortable ride over rough terrain.
- Wide-stance mast improves through-the-mast visibility.
- Your operator sits high and off center. With plenty of head, leg
and elbow room, it's easy to get on and off from either side.
- Durable, vinyl-covered seat readily sheds water.
- Thick, firm cushions comfortably support your operator. An optional
suspension seat provides even greater cushioning. Seat belts are
standard and should be worn at all times.
Easy To Maintain
- Mast slider blocks adjust without mast disassembly.
- Handy brake bleeders on the front of the cowl (4-wheel drive and
towable 2-wheel drive models).
- Easily accessible fuse panel at the base of the steering column.
- Easy-to-reach lube fittings on steer axle.
- Hood removes by pulling just four bolts.
- Floorplates lift out for easy access to transmission, control valve
and hydraulic pump.
- Precleaner extends filter life by removing large particles before
they read the air cleaner.
Technical Specifications |
Engine | Perkins or Cummins, 86 hp, 2600 rpm |
Transmission | Powershuttle, soft-shift, 4 speeds fwd, 4 speeds reverse |
Brakes | Fully enclosed, inboard wet disc on drive axle |
2WD Axle | Heavy duty, one piece |
4WD Axle | Heavy duty, planetary |
Lift Height | From 10 to 30 ft, depending on capacity |
Capacity | From 6, 000 lb. to 20, 000 lb. |