Liquid Hvac Water Flow Switch Unit Capillary Thermostat Switch 0 To 40 Degrees

ST-C General Purpose Thermostat Capillary Unit With Temperature Range 0 To 40 Degrees

The ST series range of thermostats can be used to control the temperature of liquids and gases in various applications. The liquid-filled sensing elements ensure rapid response and accurate switching differentials.

ST series thermostats are suitable for several temperature control or safety cut-out applications in pipework systems, calorifiers, ductwork systems, greenhouses, and many other installations. They all have the set-point adjustment under the cover to prevent unauthorized tampering. They are available in two types; Control thermostats (auto reset) - with an adjustable set point, adjustable differential, and auto rest, which provides a switched output to a heater or controller. Safety thermostats (manual reset) - with an adjustable set-point, fixed differential, and manual reset, which provides high limit cut-out on boilers, etc.

Technical specification

Common installation

1. The ST series should only be installed by a competent, suitably trained technician experienced in installation with hazardous voltages.

2. Ensure that all power is disconnected before carrying out any work.

3. Choose a suitable place to install the thermostat.

FAQ