|
Trade Verify
Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Contact name:JingAn Chen
HUATEC GROUP CORPORATION |
|
Verified Suppliers
|
|
|
ASME-2007 Quantitative Quality Indicators Magnetic Flux Indicator QQI Test Shim CX-430
QQI's (Quantitative Quality Indicators) are magnetic particle test pieces with artificial defects used to verify proper field direction and adequate field strength. QQI's are a valuable tool to be used to establish testing criteria with Multi-Directional 2-D and 3-D type testers and to increase productivity by minimizing magnetizing shots.
QQI's are both thin and flexible to conform to the geometry of the test piece. They must be held in intimate contact with the test piece by either tape or glue.
| Inspection items | The condition, method and demand of the test | Inspection demand | |
| Color | Metal surface presents bright silver, no rust.no scratch, no corrosion and so on | Passed muster | |
| Planeness | Put the test piece on bare board, parallel completely.no wrinkle.no burts.the surface’s roughness RA is 0.8um | Passed muster | |
| The size of sheet iron and cutting groove | The side length of test piece tested by milscale is 0.75in×0.75in.the average thickness of test piece CX-430 is 0.004in .The artificial defect symbol “o”and symbol“+”tested by precision microscope are both on the center of the test piece. The diameter of symbol four“o”is 0.507in,symbor“+”is 0.25in. The thickness of test piece CX-430 is 0.004in.the groove depth is 0.0012in, the groove width is 0.007in.
| Passed muster | |
| Quality | The physics and chemistry test show the result that the metal is made from DT4A electromagnetic pure iron plate. The analytic result of raw materials accords with the rule of GB6985, | Passed muster | |
MT test block
Type N1: 45N, 5kgs
Type N2: 118N 12kgs
Type N3: 177N 18kgs
MT standard block
Katos rong type B: DC HRC=90～95, 12 drilling through holes diameter 0.07inch, center hole diameter 31.8mm
Type E: AC
MTU test blcok
