5-7T/H medium capacity disc stack separator for mineral oil with
self-cleaning bowl
Centrifugal separation technology for mineral oil
In modern industrial production, lubricants are needed in many
industries, such as steel plate processing, cutting fluids in
mechanical processing plants, vacuum pumps and etc. Lubricating oil
greatly facilitates the production and processing procedures, but
the price of lubricating oil is expensive, and if it is directly
discharged, it will cause serious environmental pollution.
Therefore, HUADING specially designed a series disc
separator for lubricating oil recovery, which not only can
increase the amount of lubricating oil. It can save the cost
greatly and protect the environment from damage at the same time.
Product description
Huading three-phase disc separators are widely used in lubricating
oil recovery. According to different types of lubricants, the types
of centrifuges are also different. According to the different
oil-water ratio, the centrifuge drum structure is also very
different. For materials containing harder impurities, the
centrifuge drum is equipped with anti-wear parts. The machine
adopts on-line pressure regulation. According to the effect of
separation, it can be adjusted quickly. After the equipment is
debugged, the centrifuge runs fully automatically under PLC control
without manual intervention. According to customer needs, the
centrifuge The output range is between 200-20000L/H.
Main parameter
Voltage | 220-440V |
Power | 4-90KW |
HMI | SIEMENS |
PLC | SIEMENS |
Frequency converter | ABB or CUMARK |
Motor | ABB or WANNAN |
Separation effect