Henan Hongtai Kiln Refractory Co.,Ltd. |
Verified Suppliers
|
|
Lower price mullite insulation brick for kiln lining
Light weight Mullite insulation brick is a kind of quality refractory insulation materials for resisting high temperature with features of light weight, low thermal conductivity, thermal insulation and high compression strength in the high temperature furnaces or kilns. lightweight bricks are mainly used for the top of hot blast stove, stack and bottom of blast furnace, regenerative chamber of glass melting furnace, lining of ceramic high temperature furnace and so on.
Light weight Mullite insulation brick is manufactured with mullite as the main crystal phase and contains about 65~75% alumina content. Light weight Mullite Insulation Brick has high refractoriness that reaches up to 1790 ℃. Its apparent initial softening temperature is about 1600~1700℃. Its cold crushing strength is about 70~260MPa. Light weight Mullite Insulation Brick can be classified into different types of 1350 lightweight brick, 1450 lightweight brick and 1550 lightweight brick according to different service temperature and into Lightweight Mullite Brick and Heavy Mullite Brick according to different bulk density.
Lower price mullite insulation brick for kiln lining
Light weight Mullite Insulation Bricks Features:
1. Low thermal conductivity, with good thermal insulation effect;
2. Low thermal melting, due to low thermal conductivity, the
mullite series of lightweight insulation bricks accumulate little
heat energy, and the energy saving effect is obvious in
intermittent operation;
3. Low impurity content has very low iron box alkali metal and
other oxide content, therefore, high refractoriness; high aluminum
content makes it maintain good performance in a reducing
atmosphere;
4. High compressive strength in hot state;
5. Accurate appearance and size, speed up the masonry, reduce the
amount of refractory mud, ensure the strength and stability of the
masonry, thereby extending the life of the lining;
6. It can be processed into special shapes to reduce the number of
bricks and joints.
It can be directly used for the lining of high-temperature kilns,
and has been widely used in shuttle kilns, roller kilns, glass and
petrochemical kilns.
There are many kinds of light weight mullite insulation brick products standard in different countries, regulars are Chinese standard MG23 (1230°C), MG25(1350°C), MG26(1400°C), MG27(1450°C), MG28(1510°C), MG30(1620°C), MG32 (1730°C); and similar JM23, JM25, JM26, JM27, JM28, JM30, JM32; and K23, K25, K26, K27, K28, K30, K32 and others likes A series, A1, A2, A3, A4, A5, A6, A7; B series, B1, B2, B3, B4, B5, B6, B7; C series, C1, C2, C3 and some refractories have their own name, like MD, HT and so on.
Main properties | C1 | B6 | C2 | B7 | JM20 | B4 | M23 | B5 | JM25 | JM26 | JM28 | JM29 | JM30 | |
Classification temperature | °C | 1300 | 1400 | 1400 | 1500 | 1100 | 1200 | 1260 | 1300 | 1350 | 1430 | 1540 | 1580 | 1600 |
Density | Kg/m3 | 1000 | 800 | 1100 | 900 | 500 | 800 | 500 | 800 | 800 | 800 | 900 | 1100 | 1100 |
Modulus of rupture | Mpa | 2.1 | 1.8 | 3 | 2.5 | 0.7 | 1.2 | 0.7 | 1.2 | 1.2 | 1.8 | 1.8 | 2 | 2 |
Cold crushing strength | Mpa | 3.5 | 2 | 4 | 3 | 0.8 | 2 | 1 | 2 | 1.8 | 2 | 2.5 | 3 | 3 |
AL2O3 | % | 45 | 55 | 57 | 64 | 45 | 45 | 45 | 45 | 45 | 55 | 64 | 70 | 73 |
SIO2 | % | 49 | 41 | 38 | 32 | 50 | 50 | 48 | 45 | 45 | 41 | 32 | 28 | 25 |
FE2O3 | % | 0.9 | 0.9 | 0.9 | 0.8 | 1 | 1 | 1 | 0.9 | 0.9 | 0.9 | 0.7 | 0.7 | 0.6 |
K2O+Na2O | % | 1 | 0.9 | 1 | 0.8 | 1 | 1 | 1.2 | 1 | 1 | 0.9 | 0.8 | 0.7 | 0.7 |
If you don't have detailed information about the light weight mullite insulation brick, Just tell us which type of furnace, using temperature and size, we could choose proper refractory products for you. If you could supply more details, like sintered products, whether have atmosphere and what, refractory brick drawings and data sheet, we'll be very appreciated.
Light weight mullite insulation brick size:
For light weight mullite insulation brick, we have 230*114*65, 230*114*75 in stock and other size could process according to the drawings and requirements. The technical data pertains to machine pressed standard bricks in compliance with the testing standard. These data are typical approximate guide value. Not to be construed as a binding specification.Size tolerance ±1.% or 1.5 mm whichever is greater. Light weight mullite insulation with properties of higher values available where applications require the same.
Lower price mullite insulation brick for kiln lining
1.The lightweight mullite insulation bricks Production Process
Crushing→Mixing→Shaping→Drying→Firing→Inspection→Packaging and
Shipment
2.The lightweight mullite insulation bricks Quality Assurance
HongTai Refractory is committed to high quality standards for all
its products and services. With its thirst on State of the art
technology at every level and a wide range of products, HongTai
Refractory can provide ideal solutions for the stringent
requirement of the customer. Backed by decade of experience in
different industries, and close association with customers,HongTai
Refractory will always bring new products which will give better
life and value to the user.
The quality assurance system consists of the following steps:
1. Inspection and Control of incoming raw materials:According to
the chemical content,raw materials are classified into different
levels to ensure quality of brick first.
2. Inspection and process control:During the production, each brick
weight twice to reduce weight error.
3. Inspection of product Standardization of quality of each product
by process control and experimentation.
4. Taking corrective measures whenever deviations are noted.
Light weight mullite insulation brick Application
Lightweight mullite insulation bricks are widely used in various
kiln linings, thermal insulation layers and thermal insulation
layers in metallurgy, machinery, ceramics, chemical and other
industries. The use temperature is 1300-1600 ℃, which is an ideal
energy-saving product.
At present, most of the high temperature resistant materials used in kilns use lightweight bricks as masonry materials, which can reduce the weight by about twice. Save the cost of building kilns and save raw materials: to achieve the same use temperature and effect. can be directly contact with the flame,this insulating brick can be used as linings or thermal preservation layers in various industrial furnaces and kilns in metallurgical industry, ceramic industry, chemical industry, machinery industry, such as blast furnace, hot blast stoves ,electric arc furnace, cement kiln,melting furnace, ignition furnace, flue, refining equipment, heating equipment and piping, regeneration device, gas furnace, soaking furnace, annealing furnace, heat reaction chamber and other thermal industrial equipment.
Light weight mullite insulation bricks can be used as hot surface refractories or other refractory materials to support thermal insulation, used in melting furnaces, ignition kilns, flues, refining devices, heating devices, regeneration devices, gas furnaces and pipes, soaking furnaces, Annealing furnaces, reaction chambers and other industrial thermal equipment.
Lightweight mullite insulation bricks used in ceramic tunnel kiln or ceramic shuttle kiln as lining could reduce 50% the weight of furnace, save lots of energy, easy installation and maintainance, is ideal insulation material for ceramic furnace.
Henan Hongtai Kiln Refractories Co., Ltd. is committed to the production and sales of refractory materials for industrial furnaces, and strives to create energy-saving refractory products for industrial furnaces. Provide customers with high-quality (heavy refractory bricks, light insulation bricks, unshaped refractory castables, etc.) refractory products and provide good masonry solutions, and strive to provide customers with intimate sales and after-sales services.
Lower price mullite insulation brick for kiln lining
Packaging for light weight mullite insulation bricks
1.Pallet+Paper or Steel angle bead+Paper board +Plastic or Steel
belt +Plastic film or carton boxes+pallet
(1)Wooden pallet size: Usually 0.92*0.92m(standard brick),but 1*1m
(special shape brick) at most,
(2)Load weight of each pallet:Usually 0.3-1.2 Tons according
different density, max 1.5 Tons.
(3)20 Foot Container can be loaded max 21 Tons, about 20-24
Pallets.
2.Can make the light weight mullite insulation brick package
according to customer's requirements.
Shipping for light weight mullite insulation brick
1.FEDEX/DHL/UPS/TNT for samples.
2.By Sea for batch goods.
3.Customers specifying freight forwarders or negotiable shipping
methods!
4.Light weight mullite insulation brick Delivery Time:
(1) Mullite insulation brick Samples:3 days for common shape
samples;15 days for special shape samples.
(2)Batch goods:Within 7-10 days for in stock light weight mullite
insulation bricks from ordering shipping space to deliver goods and
within 20-30 days for special shape leight weight mullite
insulation bricks.
Payment Terms
(1)T/T, Western Union,LC;
(2)Usually 30% deposits,70% balance to be paid before delivery or
against copy of BL or negotiations
Others
1. MOQ: Usually 1 container, MOQ 1Tons, Customers can order certain
PCS for special light weight mullite insulation brick.
Lower price mullite insulation brick for kiln lining
Henan hongtai kiln refractory Co., LTD. Is well aware that there
are thousands of demands from customers, which can be summarized in
four aspects: reliable quality, timely delivery, reasonable price
and considerate service.The company will continue to adhere to the
corporate spirit of "contributing to society and serving customers"
and the business philosophy of "mutual benefit, win-win, integrity,
efficiency, preciseness and responsibility".Our company is willing
to develop a wide range of technical exchanges with colleges and
universities and colleagues from all walks of life at home and
abroad in a flexible and diversified way.
Henan hongtai kiln refractory Co., LTD. Main products are high
alumina brick, clay brick, fused zirconium corundum brick, fireproof ball lightweight insulation brick, light weight mullite
insulation brick ,wear-resistant pouring material, corundum pouring
material, low cement high strength pouring material, impermeable
material, self-flowing material, plastic material, and various
types of refractory materials.For different industries, the cement
industry with anti-flaking high-alumina bricks, alkali resistant
bricks, phosphate bricks;Boiler industry USES all kinds of brand
wear-resisting brick, corundum brick, mullite brick and other
finalizing materials.
Henan hongtai kiln refractory Co., LTD. : "quality first,
reputation first, customer first: it is our aim."Scientific
management, strong technical force, perfect testing means, advanced
technological equipment and stable product quality are the
guarantee of quality service.Henan hongtai kiln refractories co.,
LTD sincerely hopes to cooperate with you hand in hand and in good
faith.
Lower price mullite insulation brick for kiln lining
1. Strong professional:
Our company has thirty years producing experience in refractory
products. Our manager will supervise on a various refractory
production materials, process control, quality supervision and
package delivery, and ensure the products are 100% qualified.
2.Annual supply:
Our company has passed ISO9001 quality management system
certification and SGS certification. And the annual supply of
shaped and unshaped refractory product is 28, 800-35, 000 tons.
3. Export experiences:
Now we have gained a global sales network reaching Taiwan, Russia,
South Korea, Vietnam, Pakistan, Bulgaria, French, India, Congo,
Angola, South Africa, and so on.
4. Production equipment:
Production and testing equipments are new, complete and automated
or semi- automated. Such modern facilities and equipments have
provided the fine technical guarantee for the production and
testing.
5. Testing equipment:
Our company's testing equipments as follows:
High Temperature RUL Tester Bulk Density Tester The Pressure Tester
Refractoriness Tester
Hongtai Kiln Refractory has professional sales and after-sale service team who provide customers all-around service about product selection, transportation, installation and operation technology training etc. Now we have established cooperation relationship with many science and research units and our products have been sold to Vietnam, Thailand, Malaysia, South Korea, Pakistan, Kazakhstan, India, Japan, Indonesia, Germany, Italy, Mongolia, Russia, Argentina, colombia, Egypt, South Africa and etc.
We has over 20 years experience on producing the light weight mullite
insulation brick.
Payment Guarantee: If couldn't trust us at first order, could use trade Assurance.
Jerry Li
Cell&WhatsApp: 0086-13373957739
Skype: live:.cid.b12dd76d43ac731e
Email: jerry(at)firebricks-supplies.com