Home Companies Shenzhen Civada Precision Mold Accessories Co., Ltd.

Tapered Type Stepped Ejector Sleeves Small Thin - Wall Concentricity SKH51

Contact Us

[China]

Trade Verify

Address: Rm. 2206, Bldg. B, Shenfang Plaza, Renmin South Rd., Luohu Dist., Shenzhen, Guangdong, China (Mainland)

Contact name:Ruby L

Shenzhen Civada Precision Mold Accessories Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Tapered Type Stepped Ejector Sleeves Small Thin - Wall Concentricity SKH51

Country/Region china
City & Province shenzhen guangdong

Product Details

 

Tapered Type Stepped Ejector Sleeves Small Thin - Wall Concentricity SKH51

 

 


 

Note :

Recessed hole (C) dimension varies with the shape of relief tapered section.
Note that the stepped center pin's shaft diameter (D) is too large to fit in the recess (C).

 

 

 

1. Material 

  • SKH 51-- JIS High Speed Steel  ( M2 )( 1.3343 ) equivalent
  • SKD 61-- JIS Die Steel  ( H13 )( BH13 )( STD61 ) ( 1.2344 ) equivalen
  • 65 Mn , SUJ2 , HSS , etc 

2. Hardness 

  • 58 to 62 HRC or depends on processing materials

 

3. Specifications 

  • Standards : MISIMI / DIN / AISI etc.
  • Mounting method flange fixing 
  • Further dimensions, lengths and materials available on request
  • Customized sizes are accepted
  • Service: OEM available , and standard with stock
  • Closest tolerance : shaft 0 ~ - 0.01 mm , head 0 ~ - 0.05 mm 
  • Polishing: can make close to Ra 0.4 standard is R0.8
  • Good-quality and precision
  • Nitrogen treatment to improve the hardness 
  • More products can be produced according to DANLY / DME / HASCO / TOHATSU / FIBRO / AGATHON / STRACK / PEDROTTI / RAYMOND / FUTABA / SANKYO / PROGRESSIVE / RABOURDIN , etc.

 

 

Application 

 

  • Plastic injection mold components  

 

  • Ejector sleeves are hollow and can be used to protect and guide the pin, further enhancing 

 

 

 

  • Ejector pins are used to eject completed parts from die moulds and are commonly used in

 the plastics, automotive, aeromotive and medical industries, amongst others. A blade shape is used when

 

 there is only a small surface area on the finished part. They are also known as knockout pins, knock-out 

 

pins or KO pins. When the mould is opened, the pins extend into the mould cavity, push the part out, and 

 

then retract, allowing the mould to close and be refilled.

 

 

 

  • Important factors to consider when selecting ejector pins are corrosion resistance, 

durability, tolerance and tensile strength. Ejector pins can be made with a variety of treatments, which 

 

affect the hardness of the pin. By choosing the right ejector pin for the application, the lifespan and 

 

durability of the pin will be enhanced.

 

 

  • Through hardened pins are good all-purpose steel pins that are heat-treated to be uniformly 

hard throughout their diameter. They are often used for injection moulding of plastics and can be used in 

 

cooler moulding environments below 200°C.

 

 

 

  • Case hardened pins are nitrided pins that are suitable for die casting and can be drilled or 

tapped. They can be used at temperatures above 200°C and are quite durable. They can chip when 

 

compared to through hardened pins but have a greater life expectancy at higher temperatures.

 

 

 

  • Blackened or oxidated ejector pins are designed for extremely high temperature working 

environments. They can be used at temperatures from about 600-1000°C. These ejector pins have a self 

 

lubricating surface coating that allows them to be used at these high temperatures.

 

 

 

  • Ejector pins can be further enhanced by our TiN TiCN HW coating and other coatings which 

protect them and make them more durable. These coatings work by reducing friction so that the pins 

 

become more wear resistant and the ejection of the part becomes more consistent.

 

 

 

 

 

 

Machinery & Equipments

 

  • CNC machining center; CNC lathe; Normal lathe; CNC milling machine;
  • General punching machine, CNC turning center; Wire EDM, etc. 
  • And we also can offer 4 or 5 axis-CNC center processes.
  • General milling machine; General drilling machine; General planning and grinding machine 

   


 
​Further Information

 

Testing 
machine

Digital Height Gauge, caliper, Coordinate measuring machine, projection machine,
 roughness tester, hardness tester and so on.

QC

 1) Technicians self-check in production
 2) Engineer spot check in production
 3) QC inspects after mass production finished
 4) International sales who were trained the technical know-how spot check before shipping

Main Markets

North America, South America, Eastern Europe , West Europe , North Europe, 
South Europe, South Asia, Africa Africa

  
 

 


Packing & Delivery 
 

Package

Coated with anticorrosive oil, packed in carton box 
with bubble wrap, together with QA report.

Express

DHL, FedEx, UPS, TNT,by Sea .

 


 
Main products 

  • HSS punch ,Precision punch ,Ejector punch ,Punch ejector pins, Ball-lock punches, Punch retaine
  • Die button
  • Guide pillars ,Guide bushings ,Guide post set ,Ball cages 
  • Mold ejector pins ,Ejector sleeves 
  • Oiless bush , Bronze Wear Plate

 




 

 

 


 Spot Light of CIVADA 

 

  •  Factory opened more than 12 years
  •  Factory Size : 1,000-3,000 square meter
  •  Reserch & Development Group : 8 people
  •  Equipment & Machine : all imported precision ones
  •  Good reputation in Mold Components Area.
  •  One-step servise for your much time and cost 
  •  Complete quality management system . 

Hot Products

Wear resistant ejector sleeve steel , WS , HWS , HSS HRC58 ~ 62 Vacuumed treatment Quick Detail: ...
JIS head Straight Ejector Sleeves M2 / H13 / HSS Blank type MISIMI standard 1.Material SKH 51-- JIS ...
Tapered Type Stepped Ejector Sleeves Small Thin - Wall Concentricity SKH51 Note : Recessed hole (C) ...
Plastic Injection Mold Ejector Sleeves Metal JIS , DIN , AISI with Carburising treatment Quick ...
JIS head Straight Ejector Sleeves M2 / H13 / HSS Blank type MISIMI standard 1. Material SKH 51-- JIS ...
Straight Ejector Sleeves MISUMI / DIN / DME Standard for Plastic mold 1. Material SKH 51-- JIS High ...