Single Phase Automatic Voltage Stabilizer Adjusted Digital Control With Gray Color

GTZW-D10-1600 KVA 1 Phase Digital Control Voltage Stabilizer Specifications

9.Display

1. Working Environments

Usage:indoor,vibration-free & jolt, stabilizer no serious affection from insulation gas, steam, chemical deposition, dust, dirt and other bombings and corrosive medium.

Working Voltage: 127/120 +/-30% ,50/60HZ

Working Environment Temperature:-15℃～+45℃

Altitude:≤3500m,

Relative Humidity :≤90%

Noise <9 DB1 Mt

Terminal Block for adding phases

1. Product Specification

3.Characteristics

v LCD Large-screen

Using large-screen LCD display, can shows dynamic display voltage, current, and all kinds of working condition.

v Product Characteristics

The speed of response time(regulating speed) is very fast, non-contact, anti-interference, no mechanical failure and wear of carbon brush, maintenance-free. Three-phase voltage regulating independently to ensure the balance of output voltage . Effectively protect the security of the precision equipment.

v Precision (output accuracy) Can Be Adjusted

All precision of the stabilizer is preset plus or minus 2 Volt. According to different load demand can be adjusted plus or minus 2 Volt plus or minus 2 Volt.

v Manual Voltage Regulation

According to production requirement, within the scope of the 10% rated voltage value, the stabilizer can set voltage arbitrarily for different electrical equipment.

v Automatic Bypass Function

Equipped with automatic bypass function, when the stabilizer fails,it can turn into the mains automatically, no affection for the production.

v Output High and Low Voltage Protection Function

When monitoring circuit detect the output voltage beyond the upper or lower limit, voltage stabilizer can turn into the mains automatically, no affection for the production.

v Lack of Phase/Phase Fault Protection Function

When monitoring circuit detected phase failure, voltage regulator /stabilizer will cut off the output automatically and voice-alarm.

v Delay Stabilizing Output Voltage Function

Voltage Stabilizer boot or recover from a state of protection, would not be regulated immediately. But stay on only after users determine that the mains voltage are normal to ensure that the load equipment would not be damaged.

v Automatic Output Function

System preset is automatic output. When stabilizer connect to the mains, system detect that the power grid is normal, then it would delay <3 ms, stabilizing output voltage automatically.

v Modular Design, Easy to Replace and Repair

Adopting modular design, regulating circuit and monitoring circuits independent to each other, all components are standard-normalization. Assembly, debugging, maintenance are more simple and quick.

v Strong Load/Carrying Capacity

When the short-time overload or short-circuit, the transformer would not be damaged to avoid coil burning fire. When overload 100%, stabilizer can withstand 15 Min seconds, 10 seconds for overload 500%.

1. Main Technical Index

5.Main Material List

6.Technology and Special Requirements

1.With output manual bypass switch;

2. Enclosure material: Baosteel(or Wuhan Iron and Steel Group Corp)2mm thick cold-roll steel sheets；

3.Surface Treatment:G139→Phosphating+PZ660 powder+powder coating(RAL7032);

4.Products manufacture in accordance with the law of the People's Republic of China industry standard ,Compensating AC Stabilizer Targets.

7.Technical Documents

Provide the complete technical file about the equipment :

A.1pcs The whole machine quality certification.

B.1pcs Product test report

C.1pcs User Manual

8.Quality Assurance and After-sales Service

1)Equipment warranty period is 2 year from the date of delivery;

2)During the warranty period,supplier offer technical support for free; When get the notice of the failure by the Party A, Party B should implement the warranty obligations; Reponse within 8 hours and the solution should be given without 24 hours to reduce the losses of Party A. If maintenance need other spare parts, Party B assist purchasing, installation and debugging, within 48 hours solve the problem.

3)After the warranty period, the supplier provide user with timely, high-quality, favorable technical service and supply spare parts.

10.Pictures