Stationary Dust Collector and Fume Extraction for the
Central Fume Collection System
LB-PC multi-cartridge dust removal equipment is a kind of efficient
and energy conservation equipment, which is modularized and
systematic produced combining with advanced technology power
accoording to our conclusion of design and practical experience .
It is widely used for dust purification in mechanical processing,
chemical, construction, materials, pharmaceutical, electronics,
wood processing industry, etc.
Dust-laden air goes into dust collector from the top or the side
import, the dust is "closured" by cartridge appearance and gathers
together. The purified air is discharged out from the cartridge
center, which achieve the purification purpose. In order to clean
the cartridge, making use of compressed air (0.6-0.7Mpa) to produce
a strong air current, which release into the cartridge center
through the electromagnetic valve, and oscillate and blow down the
dust accumulated on the external surface of cartridge as the
vibration waves. The dust fall down in the ash bucket in the
following. In order to ensure the cartridge works normally and
continuously, dynamic change dust, the PLC control system blow
• small volume, small footprint, saving space;
• high efficiency of cleaning; Purification rate is more than 99%
on the particles bigger than sub-micron.
• using imported cartridge of the United States as main part with a
long service life;
• reasonable structure, easy for maintenance, low-cost; convenient
for cartridge replacement without any tools;
• Energy-saving, running resistance is 500-800pa, initial
resistance is 200pa,and the maximum resistance is 1500pa.(
according to the air pressure of fan)
• inported PLC control adjustable pulse blowing conversely,
equipped with import pressure indicator;
• Series horizontal cartridge, a single seal to ensure the safety
of equipment operation and easy for maintenance;
• flexible box composite element can be installed to meet different
• a variety of cartridge material can be choiced for users,
including high temperature resistant, anti-moisture, flame
retardant and so on.
Spec LB-PC Multi-cartridge filters dust collector:
Cartridge filter qty(pcs)
solenoid valve model
LB-CY dust collector is especially designed for dust collecting in
heavy duty conditions. It is of small size, high efficiency,
utility, obvious effect for energy-saving, easy to maintain and
other advantages. It is used widely in mechanic industry, casting,
welding, construction material, light industry, metallurgy,
chemical industry and etc.
You can put the machine inside or outside the workshop and then
connect with the duct piping for fume capture in each working
Details model and Technical parameter:
|Model||Airflow||Cartridge qty||Power||Valve model||Valve qty||Body Size(MM)||Inlet size ||Weight|
LB-C Type Multiple Cartridge Dust Collectors:
1)Low emission concentration, can the filter the dust smaller than
2)Good permeability, low gas resistance.
3)Soot is convenient, automatic dust clean; Ensure the continuity
of production and efficiency.
4)Dust collection container is convenient to disassemble, compact
connection with filter funnel, dust does not leak.
5)Filter cylinder surface is smooth, good waterproof and oil proof
|Cartidge Q’ty(pc)||Pulse valve||entrance concentration|
|Compressor Air m3/min|
Other type dust collectors :
LB-GD high Vacuum welding Dust Collector
High vacuum model dust collector mainly applied to purification
dry, no oil, no corrosion of the smoke gas during welding, cutting
and grinding process, can connect with the Robot arm for the
operation condition of the robot welding.
This kind of filter with low noise high negative pressure fan, not
only with low noise,but also produce quite high negative pressure.
Can connect to multiple station convulsions dust removal at the
The equipment adopts the integrated design, compact structure;
cover a small area l, and electric control system use PLC for
automatic control, easy to operation. The high pressure dust
removal system adopts imported and heat-resistant, wear-resistant
high pressure composite suction hose, its inner surface smooth wind
resistance losses small.
According to the different work station requirements, its methods
of catching dust can be used in a high pressure suction mask,
universal environmental protection welding torch, grinding wheel.
LB-XF Cyclone dust collector
Suitable for smelting, casting, sand blasting, building materials
and refractory materials and other industries, can also be used for
the coarse material level dust collection and dust removal system.
Portable Fume Extractors for one or two working stations:
LB-JZX Double cartridge Filters Welding fume extractor
JW HEPA Two Grade Filter for Welding Smoke:
LB-JK Cartridge type simple structure welding fume tracker:
LB-JF High Vaccum model welding fume extractor, espeically for
robet welding, or welding gun connected directly
LB-QX Solder and Laser Fume Extractor with one or two self support
We,Qingdao Loobo Environmental Protection Technology Co.,Ltd is
aimed to air purifying and kinds of removing fume exhausted, with
its own R&D team more than ten years manufacturer, located in
Qingdao city of china, specialized in the main products:
1,portable fume extractor, welding smoke purifiers, soldering fume
extraction units, laser cutting smoke filters
2.downdraft benches(grinding dust removal worktable),
3.central fume purification projects,
4.Spare parts:flexible suction arm,etc.
All of our products with the ISO9001, and CE certification for
parts of products, the quality can be guaranteed.
ATTN: Miss Molly Huang
Qingdao Loobo Environmental Protection Technology Co.,Ltd
Factory Address: Jinhong xi RD,Jinling industry, Qingdao, China
www.hqhlooboex.com (English version)