Ultrathin Home Ssafety 85DB Wireless Interconnected Smoke Alarm Detector With Self Checking

Ultrathin Home ssafety 85DB Wireless Interconnected Smoke Alarm Detector with self checking

About this item:

1. The Interconnected Wireless Smoke Alarm with Voice Location features an 85-decibel siren that tells you where the danger is located. A photoelectric sensor detects smoke while minimizing false alarms from cooking or shower steam. Interconnected smoke detectors in different locations are designed to work together, with one alarm triggering the other alarm during a fire, helping to provide the earliest warning for your family.

2. Battery powered alarm requires no rewiring for installation and provides continued monitoring even if there's a power failure
3. Wirelessly connect upto 30 first alert enabled alarms for the maximum in whole home protection; includes test/silence button, low battery warning, end of life timer

Specification:

Feature:

Smarter Wireless Interconnection
Upgraded with advanced wireless interconnection technology, this smoke alarm uses radio frequency (RF) signals to communicate with up to 24 alarms. When one alarm is triggered, all alarms will sound. This allows you to hear an alarm from anywhere in your home, regardless of where the fire hazard starts, ensuring the safety of your entire home.
10-Year warranty Battery with Low Battery Warning
The wireless alarm utilizes a 10 years lithium battery that supports up to 10 years of continuous monitoring. A self-check function issues a low battery warning - Red LED flashes once every 60
seconds and 1 beep every 60 seconds. - to inform you it’s time to replace device, ensuring uninterrupted protection for enhanced safety.
Quickly Locate the Source Alarm
Only the originating unit can silence all interconnected alarms. Press the test/silence button on any interconnected alarm. If all alarms are muted, the smoke alarm you pressed is the source alarm. If one smoke alarm is still sounding, that alarm is the source alarm. This allows you to easily locate the source alarm, ensuring an immediate respond to fire.

How to create the interlinked network:

Step 1: Press the test/silence button on one of these smoke alarms 4 times, and the green LED will rapidly flash continuously, indicating it has entered the transmitting mode (valid time: 60 seconds) .

Step 2: Press the test/silence button on the other smoke alarms twice, and the green LED will slowly flash continuously, indicating it has entered the receiving mode.
-----If pairing is successful: The green LED of these alarms will stop flashing.
-----When it is failure: The green light will continue to flash for 60 seconds, and then the red light will stay on for 2 seconds.

How to disabling the interconnect function:

Press the test/silence button on the smoke alarms twice and the green LED will slowly flash continuously still 60 seconds, then ignore it and it will automatic despairing.

How to silence the alarms in network when alarm:

If the smoke alarm detects fire, the device will goes into Source/Master smoke alarm sound pattern alarmed, and emits the alarm signal; When other alarm devices received alarm signal, they will goes into Slave smoke alarm sound pattern, until the Source/Master alarm device stopped alarm; During the unit is alarming, you can find out the Source/Master smoke alarm , press the Test/Silence button to pause all other interconnected alarms.

Package List:

1 × Photoelectric smoke alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual

Qty:50pcs/ctn
Size:39.5*34*32.5cm
G.W:10kg/ctn

Trouble Shooting: 

Probem: The alarm does not sound when testing
1. Please check whether the batteries be well assembled according to the Guide required

Probem: Red LED flashes and the alarm delivers one beep every 60 seconds
The battery is low.

Probem: The alarm delivers one beep every 40 seconds
1. clean the alarm. please refer to the “maintenance and cleaning” section.

2. The alarm is malfunctioning. Contact the retailer to replace it.

Probem: Nuisance alarms triggered intermittently or when residents are cooking, taking showers, etc.
1. Press silence button.
2. Clean the alarm. Please refer to the“maintenance and cleaning” section.
3. Move the alarm to new location.