Guangzhou Changfeng Steel Co., LTD |
|
SAE4140 1.7225 SCM440 EN19 Structural Steel Round Bar for
Engineering
Perform Standard: GB/T 3077-1999
C | Si | Mn | Cr | Mo | P | S | Ni |
0.38~0.45 | 0.17~0.37 | 0.60~0.90 | 0.90~1.20 | 0.15-0.25 | ≤0.018 | ≤0.030 | ≤0.012 |
1, Application
It used for section large forgings, such as locomotive traction
gears, with supercharger drive gear, the rear axle, the connecting
rod and the spring load greatly clip,oil drill pipe joints and
fishing tools,etc.
2, Feature
It has good weldability suffers with increasing chromium content, high temperature strength and high pressure hydrogenation properties
are promoted by chromium and molybdenum;
Its molybdenum significantly reduces temper brittleness;
Its Chromium renders steel oil hardenable and increase hardenability;
Its Chromium molybdenum high tensile steel with yield strength of
550N/mm2;
3,Mechanical Properties:
Tensile strength:σb (MPa):≥1080(110)
Yield strength:σs (MPa):≥930(95)
Elongation:δ5 (%):≥12
Section shrinkage:ψ (%):≥45
Impact work:Akv (J):≥63
Impact toughness value:αkv (J/cm²):≥78(8)
4,Ready Stock:
Round Bar diameter 14-460mm.All the sizes as require can be customerized as fresh production
with MOQ.
5,Delivery state:
Hot rolled, Heat Treatment,black, hardness or tempered hardness:28-34 HRC.
Annealing:HBS<=235.
6, Delivery time
For abundant stock, 15-20 days.For customized products, 30-50 days.
We have full set of equipement (sawing machine/grinding/polishing
machine) to make customer's specification.
Listed specifications are only typical grades; products of required
specifications can be developed/produced per international, Chinese
or industry standards, or based on agreements with customers.
Product Photo
Strict Quality Control
Loading Photo