SKD12 1.2631, A8 Hot Rolled Forged Cold Work Alloy Steel for
cutting tools
Introduction
SKD12 case of air quenching tool steel with deep air-hardening
properties, which requires tempering after quenching quenching and
tempering must maintain its complex shape of the mold is extremely
useful.
The air quenching of steel due to the deformation caused by
manganese-based oil is only about 1/4 of quenching tool steel, the
wear resistance between manganese oxide and high carbon high
chromium tool steel, toughness better than any one particular It
requires suitable for good wear resistance but also has good
toughness, special tools, widely used in die cutting and forming
dies, roll, punch, rolling dies and thread rolling dies, but also
for certain types of scissors sheet .
Heat treatment:
annealing:1,800-850oC, slow cooling 2,Spheroidizing
quenching:940-960oC, air cooling
tempering:180-220oC, air cooling HRc=60-64 510-520oC, air cooing
HRc=57-60
chemical composition
C | Mn | Si | Cr | P | S | Mo | V |
0.95~1.05 | ≤1.00 | ≤0.50 | 4.75~5.50 | ≤0.025 | ≤0.020 | 0.90~1.40 | 0.15~0.50 |
Supply states:Spheroidizing HB≤230
Features:
1. This is alloy mould steel with medium Alloy content ,due to
contain molybdenum and vanadium, so that it has good hardenability,
2. SKD12 Steel has good impact toughness and good wear resistance
cause to uniform distribution of carbide,
3. Good Air quenching performance,
4. small quenching deformation ,
5. Toughness is better than 9Mn2V,Cr12
6. Uniform and fine carbide, good wear resistance.
Advance
1, Air quenching mould steel has excellent air quenching hardening
2, Good wear resistance performance,
3, Micro deformation,
4, High hardenability,
5, High compressive strength
Application
Widely suitable for Large and complex for a variety of hardware
Die, and bear a greater impact load punch die.
1, For bending carbon content of 0.65% to 0.80% of the leaf spring
that the hardness 37~42HRC, service life up to 11~12w times.
2, For bending carbon content of 0.65~0.80 spring steel plate that
the hardness 37~42HRC, And then add nitriding treatment, life
expectancy of up to 40 million times.
3, The steel can be used for thread rolling die can be used for
processing aluminum and copper alloys. .
4, Stretch film, embossing dies, die cutting, stamping die.
Products show:
Standard packing:
About Us
Guangzhou Changfeng Steel Co., Ltd. is a professional special steel company, which specializing in
this line since 2005 in China. Our main products are Plastic Mould
Steel, Hot Work Mould Steel, Cold Work Mould Steel, Alloy
Structural Steel, Tool Steel, Stainless Steel, Carbon Steel and
Forged Block.
To ensure provide high quality products to customers, we have close
cooperation with many Chinese first class special steel
enterprises, including Baosteel Group, Dongbei Special Steel,
Changcheng Special Steel, Hongsheng Heavy Industry, Xingcheng
Special Steel, Daye Special Steel.
We have thousand tons of stock materials in our own factory and
also can provide processing services to customers. We are full of
export experience for many years, the product covers America,
Germany, France, Italy, Turkey, Singapore, Thailand, Malaysia,
Vietnam, Taiwan, and Middle-East.
After years of development, our company equips with large-sized
Vertical saw machines, Horizontal saw machines, Milling machines,
Grinding machines and other advanced equipments to provide
customers with cutting and other processing services. All the
products should be inspected the metallographic analysis, hardness,
ultrasonic flaw detection and other strict inspection processes,
which meet the standards of DIN, AISI, JIS and GB to ensure their
function and quality.