Active Member
|
[China]
Address: 广州市黄埔区大沙地东路403号B802房(仅限办公）
Contact name:Echo
Guangzhou Changfeng Steel Co., LTD |
|
|
SAE4140 / 1.7225 / SCM440 / 42CrMo Alloy Steel Round Bar with
Ultra-high Strength
SAE4140 / 1.7225 / SCM440 /42CrMo steel is an ultra-high strength steel with high strength and toughness,
good hardenability, no obvious temper brittleness, high fatigue
limit and multiple impact resistance after quenching and tempering,
and good low temperature impact toughness.
1. Equivalent grades
| GB (China) | DIN (German) | AISI (USA) | JIS (Japan) |
| 42CrMo | 1.7225 | SAE4140 | SCM440 |
2. Chemical Composition (%)
| C | Si | Mn | Cr | Mo | P | S | Ni |
| 0.38~0.45 | 0.17~0.37 | 0.60~0.90 | 0.90~1.20 | 0.15-0.25 | ≤0.018 | ≤0.030 | ≤0.012 |
3. Mechanical Properties
1) Tensile strength:σb (MPa): ≥1080(110);
2) Yield strength:σs (MPa): ≥930(95);
3) Elongation:δ5 (%): ≥12;
4) Section shrinkage:ψ (%): ≥45;
5) Impact work:Akv (J): ≥63;
6) Impact toughness value:αkv (J/cm²):≥78(8).
4. Recommend heat treatment
| Quenching | Tempering | ||||
| Heating temperature/ºC | Cooling way | Hardness (HRC) | Tempering temperature/ºC | Cooling way | Hardness (HRC) |
| 850-880 | |||||
| Oil Cooling | 50-52 | 450-650 | Air | 25-40 | |
5. Application
It used for section large forgings, such as locomotive traction
gears, with supercharger drive gear, the rear axle, the connecting
rod and the spring load greatly clip,oil drill pipe joints and
fishing tools,etc.
6. Feature
1) Weldability suffers with increasing chromium content;
2) High temperature strength and high pressure hydrogenation
properties are promoted by chromium and molybdenum;
3) Molybdenum significantly reduces temper brittleness;
4) Chromium renders steel oil hardenable and increase
hardenability;
5) Chromium molybdenum high tensile steel with yield strength of
550N/mm2.
7. About SAE4140 / 1.7225 / SCM440 / 42CrMo
8. Ready Stock:
Round Bar diameter 14-460mm.
All the sizes as require can be customerized as fresh production
with MOQ.
9. Delivery state:
Hot rolled, Heat Treatment,black, hardness or tempered
hardness:28-34 HRC.
Annealing: HBS<=235.
10. Delivery time:
1) For abundant stock, 15-20 days.
2) For customized products, 30-50 days.
We have full set of equipement (sawing machine/grinding/polishing
machine) to make customer's specification.
11. Our service:
14. Corner of our factory:
