|
[China]
Trade Verify
Address: No.3077 Liuxiang Road, Jiading District,Shanghai 201818, P.R.China
Contact name:
Shanghai Jaour Adhesive Products Co.,Ltd |
|
Verified Suppliers
|
|
|
100% Solid Transparent Hot Melt Adhesive For Making Surgical Paper Nonwoven Tape Dressing
Product description
It is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for medical tapes, plasters and bandages applications.
The product is featured high tack and peel, high shear, and good ageing performance.
Suggested use
Medical tapes, plasters and bandages to various substrates, wound dressing. Other pressure sensitive adhesive applications that high bond strength and tack, high shear are required.
Technical data
Appearance :
| Transparent Solid |
| Color (Gardner) : | ≤ G5 |
| Softening Point: | 109 ℃ |
| Viscosity (Brookfield) : | @160℃ 7200 cps |
Operating Guideline
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 1800C for both, depending on machines, substrates, and plant conditions.
Package
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. Please consult the sales representative for special requirements.
Storage & Shelf life
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35℃ and above 5℃.
Direct sunlight and moisture condensation must be prevented.
Operating precautions
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
