Active Member
|
[China]
Address: Sanxing Town, Zhangjiagang City, Jiangsu Province, China
Contact name:Vickie Sun
Suzhou Ellison Packing Machinery CO., LTD |
|
|
Fully Auto PET Material Bottle Blow Molding Machine Four Cavity Mould
General information
| Project name | Bottle blowing machine |
| Bottle type | 100ml - 2000ml bottle |
| Bottle material | PET |
| Capacity | 3800 - 4000 pcs per hour |
| Bottle type | Freely design |
| Auxiliary machines | Full set |
Description
Blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Parameter
| Productivity | Depend on bottle design | 3800-4000PCS/H |
| Product type | Body diameter | 20mm-100mm |
| Height | 50mm-350mm | |
| Neck diameter | 15mm-38mm | |
| Mold | Cavity | 4cavities |
| Mold thick | 240mm | |
| Mold | 500*500mm | |
| Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
| Rated Power | 49kw | |
| Really use power | 14kw | |
| Size | L*W*H | 1900*1860*1930mm |
| Weight | 3600kg | |
| Auxiliary equipment(preform unscrambler) | L*W*H | 2000*950*2480mm |
| Weight | 250kg | |
| Resin available | PET |
Features
1). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
2). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
3). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
4). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
5). Introduce the FESTO air cylinder to avoid contamination and noise.
6). Ideal cooling system make the finished bottles without any flaws.
7). Low rejection rate: less than 0.2 percent.
8). Easy for you to install,test and start up.
Configuration
| Pneumatic part | Valve | SMC |
| Cylinder | ||
| Electric part | PLC | LG |
| Operating system | LG | |
| Relay | OMRON | |
| Infrared thermometer | America raytek | |
| Note | All of the electrical components adopts CE,UL,CCC approved international advanced high-tech product. | |
More photos for ref
