Active Member
|
[China]
Address: 15F Building 2, No.1666 Xinluo Street Qisheng Square, Jinan Free Trade Zone, Shandong，China.
Contact name:Nie
Jinan K-Flying Technology Co., Ltd. |
|
|
Multifunctions CPR and Manual ABS Medical Electric Nuring bed
Description of Hospital electric nursing bed
MX-V1 Electric Nursing Bed Iadopts a new type of split lifting guardrail that meets the IEC60601-2-52 safety standard. The gap between the front and rear guardrails is reduced. There is no need to be equipped with guardrail baffles. It can act simultaneously with the functions of the bed to maximize the protection of patients.There are special operation panels on both sides of the guardrail, which are convenient for medical staff to operate. The panel is equipped with a remote control lock button to prevent patients from misoperation. Add a safety position indicator light. When the bed is set at the lowest position, a green light will be displayed to facilitate medical staff to check the patient’s safe position at night.
Specification of Hospital nursing bed
| Product Name | Electric Hospital Nursing Bed with CPR Function |
| Full length size | 2175 ± 10mm(With extension frame to 2320 mm) |
| Full width size | 990 mm |
| Back lifting | 0° ~ 75° |
| Knee lifting | 0° ~ 45° |
| Heigh Adjust | 420 - 800mm |
| Knee tilt | 0° ~ 16° |
| Head tilt | 0° ~ 16° |
| Drainage bag hook | Located on both sides of the bed board, a total of four drainage bag hooks |
Functions of Multifunctional Electric Hospital Bed
1. New safety guardrail: when the guardrail is under stress and cannot be opened, it must be opened from the outside to the inside to open the guardrail；
2. Ball-type angle display: The bed body comes with a ball-type angle display, which is convenient for medical staff to confirm the patient's safe position；
3. Manual CPR function: Both sides of the bed body are equipped with manual CPR function, in case of emergency or power failure, the bed board can be quickly restored to the horizontal state in the rising state;
4. Handheld remote control: equipped with a handheld remote control, easy to operate;
5. Ergonomic guardrail: The upper part of the ergonomic guardrail is easy to hold and can be used as a booster when the patient sits up；
6. Restraint device: located under the bed board, with its own restraint device, five on each side;
7. C-shaped rise of the back bed board: When the back rises, the back board takes a C-shaped ascending path, which can effectively reduce the possibility of bedsores for long-term bedridden patients and prevent body position decline;
8. Central control lock system: adopt German TENTE 125 mm diameter medical double-sided casters, with locking, free and directional three-stage central control locking device, anti-corrosion, good acid resistance.
Company Information
Jinan K-Flying Technology Co.,Ltd was founded in 2009,which is a professional medical equipment manufacturer integrating with production, research and development, sales and service. Our mainly products include Hospital Bed,Medical Trolley Carts,Operating Table and Shadowless Operating Lamp etc.
Our factory is located in Chaoshan City,Guangdong Province,two hours' drive from Guangzhou City,near the Shantou Port,Shenzhen Port. Since our company is established, we have owned a specialized and energetic R&D department and a professional sales team. With the increase of investment in production research and expansion of production scale, Our products are exported to all around the world, and has got unanimous approval and favorable comment of the domestic and international customers.
We always insist on the aim: Competition and initial,quality first, customers supreme and maintenance of prestige. We will continue to provide the best products and perfect service to our clients.
