|
[China]
Trade Verify
Address: Room 101, No. 47, Changbai 3rd Village, Yangpu District, Shanghai
Contact name:Mary Wang
Shanghai Fanying Machinery Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
6-38mm hydraulic hose clamp making machine/hose crimper
DESCRIPTION
After the work is completed, the eight mold bases must be opened to the maximum extent, so that the spring can be in an open state and the spring can be maintained, and the oil cylinder is also in a pressure relief state to extend the life of the oil seal.FY-P38 high pressure hose crimper is with crimping ability from 6mm to 38mm (1/4'' to 1.5'') for high pressure hydraulic hose. It is with quick change tool for die sets and die rack, which support a safe place for dies.
OUR MACHINE'S MAIN FEATURES
1) Famous Brand valve system, high quality, long using time, low
maintenance cost
2) Foot pedal frees the operator's hand for holding big size
hydraulic hose
3) Advanced Dash control, multifunction for crimping work
4) Quick change for die sets enable die sets change all at one time
| crimping range | 6-38mm(1/4''-1.5''inner diameter of hose) |
| Rated pressure | 26Mpa/31.5Mpa(Optional) |
| The largest crimping pressure | 300T |
| Rular precision | 0.01mm |
| Output volume of pump | 2.5L/5L(Optional) |
| Net weight | 275kg |
| Work efficiency | 200pcs/h |
| size | 950*630*700 mm |
| dies | 8 sets |
| Item No.of dies | length 60mm(15,19,23,26);Length 70mm(31,36,41);Length 80mm(47,55,60) |
| crimping range | 6-38mm(1/4''-1.5''inner diameter of hose) |
| Rated pressure | 26Mpa/31.5Mpa(Optional) |
| The largest crimping pressure | 300T |
| Rular precision | 0.01mm |
| Output volume of pump | 2.5L/5L(Optional) |
| Net weight | 275kg |
| Work efficiency | 200pcs/h |
| size | 950*630*700 mm |
| dies | 8 sets |
| Item No.of dies | length 60mm(15,19,23,26);Length 70mm(31,36,41);Length 80mm(47,55,60) |
TECHNICAL DATA
| Model | FY-P38 Hose Crimping Machine |
| Crimping Range | 6-38(mm) |
| Crimping Force | 300(T) |
| Hose Size | 1/4-1.5(inch) |
| Max. Opening | 20±mm |
| Die Sets | 8 |
Maximum Open Diameter | 104MM |
| System Pressure | 26(Mpa)/31.5(Mpa) |
| Accuracy | 0.01(mm) |
Work Efficiency | 200 pcs/h |
| Standard Voltage | 220v/240v/380v/415v(optional) |
| Motor Power | 3(KW)/4(KW) |
| Length | 950(mm) |
| Width | 630(mm) |
| Height | 700(mm) |
| Weight | 275(KG) |
NOTE
- for non standard die sets;
- Customized die sets are available;
- Special voltage 220V, 240V, 380V,415V are availbale;
► ADVANCED PLC SYSTEM
Multifucntional control panel with different operation mode
► DIE SETS
8 die sets hardness 59-63HRC, with quick change tool, productivity
improve much.
