|
[China]
Trade Verify
Address: No. 3299, Yaxing Road, Weifang Wenhua Industrial Park, Weifang, Shandong, China
Contact name:Gavin
Weifang Mension Machinery Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
HYDRAULIC PIPE CRIMPING MACHINE MS-NC130-II
DESCRIPTION
MS-NC130-II high pressure hose crimper is with crimping ability
from 6mm to 64mm (1/4'' to 2.5'') for high pressure hydraulic hose.
It is with quick change tool for die sets and die rack, which
support a safe place for dies.
MAIN FEATURES
1) REXROTH valve system, high quality, long using time, low
maintenance cost
2) Foot pedal frees the operator's hand for holding big size
hydraulic hose
3) Advanced PLC control, multifunction for crimping work
4) Quick change for die sets enable die sets change all at one time
TECHNICAL DATA
Model | MS-NC130-II Hydraulic Crimping Machine |
Crimping Range | 14 - 87 (mm) |
Crimping Force | 650 (T) |
Hose Size | 1/4 - 2.5 (inch) |
Max. Opening | 31 (mm) |
Die Sets | 13 |
Die Set Type | P32 |
System Pressure | 31.5 (Mpa) |
Accuracy | 0.01 (mm) |
Control | UC |
Standard Voltage | 220 (V) / 380 (V) |
Motor Power | 3.75 (KW) |
Length | 650 (mm) |
Width | 550 (mm) |
Height | 1360 (mm) |
Weight | 310 (KG) |
P32 CRIMPER DIE SETS
Die No. | Crimping Range | Length |
6* | 6 - 8mm | 55 |
8* | 8 - 10mm | 55 |
10* | 10 - 12mm | 55 |
12* | 12 - 14mm | 55 |
14 | 14 - 16mm | 55 |
16 | 16 - 19mm | 55 |
19 | 19 - 22mm | 55 |
22 | 22 - 26mm | 70 |
26 | 26 - 30mm | 70 |
30 | 30 - 34mm | 70 |
34 | 34 - 39mm | 75 |
39 | 39 - 45mm | 75 |
45 | 45 - 51mm | 90 |
51 | 51 - 57mm | 90 |
57 | 57 - 63mm | 100 |
63 | 63 - 69mm | 110 |
69 | 69 - 78mm | 110 |
NOTE
- " * " for non standard die sets;
- Customized die sets are available;
- Special voltage 110V, 208V, 240V, 415V are availbale;
► ADVANCED PLC SYSTEM
Multifucntional control panel with different operation mode
► CR12MOV DIE SETS
13 die sets hardness 59-63HRC, with quick change tool, productivity
improve much.
► SIEMENS MOTOR
World famous SIEMENS motor with high stability
► ONE PIECE FORGED OIL CYLINDER
Forged cylinder has higher anti wear ability compared with
traditional technology
► APPLICATIONS
NC130-II is a high configured hose crimper, it has the ability of
crimping high pressure stainless steel braided hydraulic oil hose,
industrial fexible pipes, air or water hose, cable and wires, steel
and iron tubes, brake lines in automotive system, air suspension or
springs.
