JiangSu DaLongKai Technology Co., Ltd |
Verified Suppliers
|
|
Manual Operation Metal Scrap Baler Machine 15kW Y81F - 160C Type
Company Profile
Jiangsu Dalongkai Technology Co., Ltd is the professional
manufacturer who is specialized in producing the balers, metal
shears, metal scrap briquette machines, loose material baler and
other hydraulic machinery. We provide both standard and customized
design in large range of different machines. They are widely
applied in industries of metal smelting, textile, fiber,
paper-making, waste recycle, automobile, metal processing and so
on. Our products are not only renowned in more than 30 provinces
and cities in domestic market, but also have being sold popularly
in more than dozens of countries and areas all over the world like
Eastern Europe, West Europe, Middle East, Africa, Southeast Asia,
Oceania, North America and South America etc.
Specifications
1. Hydraulic metal baler
2. Hydraulic drive ,manual valve operation or PLC control
3. Bale-discharging :turn-out ,push-out, forward-out
4. Waste metal baler machine
5. Metal press baler machine
Introduction
1. All machine modes adopt hydraulic driving. It can be operated
with manual operation and PLC control.
2. The foot screw is not needed for the installation, and the diesel engine can be equipped as power.
3.The bale discharging is composed of types such as tilting and bale pushing.
4.The production efficiency ranges from 0.5 ton/hour to 20 ton/hour.
5.There are 8 grades for extrusion force from 63 tons to 400 tons.
6. The feed box size and bale shape and size can be customized.
7.designed according to the raw material specification of customers.
Advantages
1. Our baler machine under 250 ton is integral structure. Hydraulic
station connects with the host machine together. So it doesn’t need
to install. One machine puts in one 20" container. And it saves
ship cost.
2. Our company use high-strength wear-resistant plate import from
America, the plates are available 15 years, do not need to change,
the price is as 5 times as the common, common plate life is three
years.
3. We use good quality seals, so no oil leak.
4. Inner blades, water cooler, protective net, hosepipe, flange,
big pressure head, relief valve, oil temperature gauge.
Technical parameters
Power system | Rated Speed | Rated Power | Power Spec. | Lid cyl. Force | Front Door cyl. Force | Main Pressure cyl. Force | ||
Motor | 1460 rpm | 15 kw | 3ph,50/60 HZ | 63 Ton | 2*24Ton | 160Ton | ||
|
|
|
|
|
|
| ||
Max.Operating Pressure | Hydraulic System Pressure | Idle Cycle Time | Hydraulic System | Rated Displacement | Operating System
| |||
31. 5 Mpa | 25mpa | APPROX. 100 Sec. | Pump |
63 mr/r
| PLC Operation | Manual valve operation | ||
|
|
|
|
|
|
| ||
Standard Operation
| Optional Configuration | |||||||
A3 Steel Liners , Surface heat Treatment | Cutting Blades and teeth(2 sides) | Cooler / Heater | Diesel / Diesel Generator for power |