SGS CE Approved Biomass Wood Fired Boiler / Industrial Steam Boiler Chain Grate DZL 2 Ton Water tube

SGS CE Approved Biomass Wood Fired Boiler Chain Grate DZL 2 Ton Water tube

The main use of Wood Fired Boiler is to provide high quality steam and power for industrial production.

Wood Fired Boiler Performance and characteristics:

1. The Wood Fired Boiler type is a horizontal quick-installed water-fire tube boiler with natural circulation of working fluid.

2. Advanced design performance

The Wood Fired Boiler is mainly made of seamless steel pipe for china standard 20# low and medium pressure boilers, and the drum is made of special steel plate for boiler.

The left and right headers are made of seamless steel tubes.

3. The Wood Fired Boiler shaft is made of refractory concrete. The rear arch is low and long, so it burns well. The two-wing flue and the side wall brick are made of refractory sintered brick. General refractory bricks are used for the front and rear walls of the boiler.

4. The Wood Fired Boiler grate is Fully Burning,which has a reasonable air distribution, the combustion chamber is large, and the coal type has strong applicability.

Adapt to all types of particles made by sawdust, corn stover, peanut shell, straw, cottonwood rod, resin, edible fungus waste and cow dung. It can also burn waste wood, rice husks, corncob and so on.

Since the high-temperature flue gas first enters the settling chamber, and then enters the two-wing flue and the front smoke box from both sides, the effect of eliminating smoke and dust is good.

5. The water circulation is simple, the structure of the Wood Fired Boiler pressure-bearing parts is reasonable, and it can be safely operated under the condition of ensuring water quality.

6. The burning equipment of Wood Fired Boiler is a quick-loading grate. The combustion equipment is manufactured and installed in the factory, and it can be directly installed on the foundation after transportation to the construction site.

7. The Wood Fired Boiler structure is reasonable and compact, and the steel consumption is low, so that the performance, weight and structure size of the boiler are obviously advanced compared with the domestic products of the same capacity.

Wood Fired Boiler Datasheet:

Boiler model: DZL2-1.25-SC

Boiler capacity output :2ton/h,2000kg/hr,150HP

Boiler Pressure:1.25Mpa

Radiation heating area:11.2m2

Convection heating area:39.23m2

The heating area of the economizer:43.6m2

Effective grate area:3.15m2

Fuel consumption:546.32kg/h

Feed temperature:20℃

Exhaust temperature:142.87℃

Design efficiency:83.27%

Boiler water capacity:7.27

Water test pressure:1.65Mpa

The chimney:φ400X35000MM

Design of fuel: biomass, Coconut shell, wood chips

3 ton Boiler bulk transport weight:14tons

Wood Fired Boiler Advantage:

1. Drum layout from top to bottom is compact and uniform heating. The Wood Fired Boiler water wall design with a membrane wall. It will prevent boiler furnace heat loss effectively

2. Water cycle structure increases heated areas and improves the water cycle effects, especially improve theWood Fired Boiler thermal efficiency.

3. Two parts assemble on customer site finally, which short the installation work and low the installation costs.

4. Wood Fired Boiler Body adopts the dual-rear-drum vertical structure, full layout heating surface and high thermal efficiency.

5. Mechanization combustion, environmental protection and energy conservation.

6. Auxiliary equipment, controlled panel PLC with a high level

7. Body and base use two pieces to leave the factory, installed in a short period and low installation costs.

8. Wood Fired Boiler evaporation capacity is 2000kg/h, design pressure is 1.25 to 2.5Mpa.