Active Member
|
[China]
Address: 1200 N Fuxing Rd Wutong District 314500 Zhejiang P. R. China
Contact name:Warren Sun
Pasia Honeycomb Products Co., Ltd |
|
|
Oversized With Customized Thickness Basalt Stone Honeycomb Panel
A: Product Description
Fuding Black Basalt stone honeycomb panel is a honeycomb backed panel with a basalt stone slice origined from Fuding area, Fujian province, China, which is known as the darkest basalt stone. As its super rigid quality and uniform color and pattern, the honeycomb panel has been widely used for the building cladding decoration. Open edge stone honeycomb panel can save material cost and production time. After the panel is successfully installed, the gap can be sealed with a sealing glue with an artistic appearance.
B: Stone Description
Basalt is defined by its mineral content and texture, and physical
descriptions without mineralogical context may be unreliable in
some circumstances. Basalt is usually grey to black in colour, but
rapidly weathers to brown or rust-red due to oxidation of its mafic
(iron-rich) minerals into rust. Although usually characterized as
"dark", basaltic rocks exhibit a wide range of shading due to
regional geochemical processes. Due to weathering or high
concentrations of plagioclase, some basalts are quite light
coloured, superficially resembling rhyolite to untrained eyes.
Basalt has a fine-grained mineral texture due to the molten rock
cooling too quickly for large mineral crystals to grow, although it
is often porphyritic, containing the larger crystals formed prior
to the extrusion that brought the lava to the surface, embedded in
a finer-grained matrix.
C: Stone Honeycomb Panel
The ultra-thin stone honeycomb composite panels are innovated because of the limited natural stone resources and its application restrict. It is a new type of building materials with a better impact resistance than the ordinary natural stone is with a weight of only 16 kg, is only 1/6 of the weight of its original natural stone slide but the compressive strength is 6 times more than the original stone slices.
Completely overcomed the natural stone’s defects on weight, fragile and other aspects, it provides a more superior performance and wide application field as a new generation building material. Ultra-thin stone honeycomb composite panel is simply bonded with an about 3mm ~ 5mm thick stone sheet and an aluminum honeycomb substrate with a special purpose adhesive. It not only saves the stone material and reduces the weight of finished products, but reflects better in the stone effect. Based on these, there is a large demand from the market.
D: The advantages of the stone honeycomb panel:
| No. | Properties | Detailed Description |
| 1. | high strength | Marble sandwiched with the tiles, granite, aluminum honeycomb panels and other composite, the bending and fracture resistance, shear strength were significantly improved, which greatly reduce the breaking rate during transportation, installation and use. |
| 2. | anti-pollution ability | Regular original marble plate will change color or with dirty pollution on the surface if using the cement wet pasting. While for the composite panel, as the dense and hard substrate and the glue film, the above mentioned situation will not happen. |
| 3. | Easier to control color difference | The marble veneer used on the marble composite panels is three or four times more than the original plate. Therefore, the color and pattern can be 3 or 4 times more the same as the original marble plate. |
| 4. | Light weight | The marble veneer for the marble composite panel with aluminium plastic panel can be only 3 ~ 5mm thick. Commonly used composite panel with tiles or granite is only with a thickness of about 12mm. It saves much cost at least on the transportation. Accordingly, it is the best choice for the use on the building with a load limit. |
| 5. | Easy installation | Depending on the above characteristics, the efficiency and safety and costs of the installation process are greatly improved. |
| 6. | Break the restricted area | The original marble plate can be used on the inside and outside wall, ground, windowsill, porch, desktop, etc. But for the ceiling, no decoration company will take risk to use no matter it is marble or granite. The aluminum-plastic backed marble panels or aluminum honeycomb backed marble panel can break through the restricted area of stone honeycomb panel. Because it is very light that the weight of the whole body is only 1/5 to 1/10 of the original plate so that it is capable of being used on the ceiling. |
| 7. | Sound insulation and moisture-proof | An aluminum honeycomb backed stone panel transcends the properties of the original stone panel on the sound insulation, moisture and heat insulation and cold insulation performance because of the honeycomb structure. |
| 8. | Energy saving | Further to the above mentioned, Stone aluminum honeycomb panel, after installation in the indoor and outdoor, can greatly reduce the consumption of electricity and heat. |
| 9. | Cut costs | Due to thin and light stone composite material, it can save costs on transportation and installation. Furthermore, the finished composite stone panel will be more cost-efficient than their original plate. |
E: Application:
High End Building indoor or outdoor decoration, countertop, elevator, ship and other transportation tooles inner decoration.
