Over 1.5 Meters' Width Ultra Wide Aluminium Honeycomb Panel with
Imitation Wood Grain and Opened Edge
Product Description
For the wood grain imitation surface for the aluminum honeycomb
panel, it should firstly coat the primer on the surface, paste the
wooden grain paper on the surface and then make the grain evenly
penetrate into the coated primer by the means of vacuum, heating
and other processes.
The main features of the wood grain imitation aluminum honeycomb
panels:
1, fine and smooth aluminum surface.
2, with a high coating hardness and strong adhesion.
3, acid resistance, weathering resistance, resistance to boiling,
alkali resistance, impact resistance.
4, after the treating of imitation wood grain, similar or better
effect of solid wood can be achieved.
For the edge open solution, as the aluminium honeycomb panel will
be used in the downstream production process for changing the size
such as cutting and carving, it is not necessary to make the edge
closed so that the cost and time can saved. Also, for the
installation method, there will be supporting frames applied to the
aluminium honeycomb panel and after installation, the edge will be
covered by the installation frame, it is not necessary to make the
edge sealed.
The width of the aluminium honeycomb panel have been expected to be
more than q.5 meters to be suitable for more real application while
the 1.5 meters' width is a common limit for most of the plant and
raw material suppliers. Pasia is able to produce the width up to
customers's requirement. Nowadays, the decoration and renovation
industries requires wider panel as the building scale is becoming
larger and larger while the lifting machines are capable to do so.
No. | Material | Thickness | Specification | Edge Treatment | Pre-treatment |
1 | Aluminium | 5mm | A3003 | Folded | Screw Enbedded |
2 | Aluminium | 10mm | A5052 | RHS Sealed | Perforated |
3 | Aluminium | 25mm | A2024 | Glue Sealed | |
4 | Aluminium | customized | A5056 | Open Edge | |
General Description
Aluminum honeycomb panel is a bonded sandwich structure system of
two surface aluminium plates and one honeycomb cores with a special
purpose adhesive. Industrial used aluminium honeycomb panel will
add some more processes such as surface treatment, edging,
embedding, carving and so on to make the panel suitable for special
conditions. It has been widely used by the industries of civil
construction, transportation, exhibition, signage, elevator, clean
room etc. The honeycomb technology is from aerospace technology.
The whole production process is finished in the modern factory,
using hot pressing or vacuum pressing technology. Due to the high
thermal conductivity between the aluminum plates and honeycomb, it
is synchronized the thermal expansion and contraction of the inside
and outside aluminium material. There are small holes on the
honeycomb core foil wall so that the air is free of flowing inside
the panel box. Furthermore, sliding mounting buckle system does not
cause structural deformation during thermal expansion and
contraction.
Features
The center material is aluminum hexagonal honeycomb with a small
density (about 3 to 7 kg per square meter), about 1/5 of the weight
of wood with the same area and thickness, 1/6 of the glass, 1/7 of
solid aluminium, which greatly reduced the building load and
construction cost. Thanks to the air contained in the core, the
panel can be sound and thermal insulated. Because of no combustible
material contained, the fire rating can be at least B1 level. The
panel performs well also on waterproof, moisture-proof, no harmful
gas release, with a high unit mass of the specific strength and
stiffness, not easy to deformation, completely overcoming the
collapse and deformation in the center area if with large panel.
The panel edge can be cut depending on real conditions. The PVDF
coating can guarantee the product life more than 30 years.
After surface treated with corrosion resistant fluorocarbon resin,
it can be widely used on curtain wall, roof, large façade, signs
and interior decoration. The front plate of the aluminum honeycomb
panel is painted with E. C. C. A. quality standards PVDF
fluorocarbon paint with ordinary color or metallic color, so the
surface has excellent weather resistance.
In case of heavy rain, there is particularly large noise when the
raindrops hit the aluminum veneer or aluminum-plastic panel, while
honeycomb panel can avoid this situation. Aluminum honeycomb panels
are generally made of fluorocarbon coated aluminum plates. The
continuous roller coating with PVDF material is the most important
point to avoid color difference and flat coating film. Based on
this, it can keep the exterior building with bright color for long
time.
Application
(1) building external curtain wall panel
(2) interior decoration works
(3) billboards
(4) ship building
(5) aviation manufacturing industry
(6) indoor partition and commodity display stand
(7) Commercial vehicle and container truck body
(8) bus, train and subway use
(9)With strict environmental requirements of the modern furniture
industry, aluminum honeycomb panel is an ideal material to produce
furniture. Depending on Its completely non-toxic green quality, it
is not necessary for the furniture manufacturers to process
environmental procedures. In addition, the surface veneer for
aluminum honeycomb panels can be diversified such as solid wood,
aluminum, gypsum board, natural marble etc
(10) aluminum honeycomb panel partition: the emergence of aluminum
honeycomb panel partition breaks the traditional partition mode,
with a noble and fresh style.