|
[China]
Trade Verify
Address: zhenglu town, tianning district, changzhou city, JIangsu Province
Contact name:Lillian
Jiangsu Shengman Drying Equipment Engineering Co., Ltd |
|
Verified Suppliers
|
|
|
12V 80m2 Chemical Slurry Hollow Shaft Paddle Dryer for Electroplating Sludge
--1 Drying efficiency could arrives 80%-90%. Heat transfer
coefficient K is 100-300Kcai/h.m2ºC. Evaporation capacity is
10-30Kcai/h.m2.
--2 The dryer support continuous operation and batch operation,
support vacuum drying for thermal sensitive material and normal
drying. Support heating, evaporating and cooling.
--3 Thermal oil, steam, hot water and chilling fluid are available
to be used as heating/cooling medium
--4 Special structure of paddle which has large heating area.
--5 Structure of dryer is very compact, almost of the dryer could
be transported by normal container.
The Hollow Paddle Dryer has a metal wall which separates the process mass from the heat source (steam or hot oil). High thermal efficiency is obtained because the heat from the thermal medium goes directly into the process mass. As the material comes into contact with the heated through and agitators, the process mass is heated via conduction. With an insulated dryer, very little heat is lost. To evaporate 1kg of water only requires about 1.2kg of steam for slurry materials. Exhaust gas is minimal and at a low temperature. Therefore, the volume of non-condensable gas from the dryer, which might require treatment, is minimal.
The dryer is an indirect heat transfer device which utilizes a high degree of mechanical agitation to enhance contact with the product being dried. Evaporation rates per square foot of heat transfer surface are maximized through self-cleaning paddles and the mixing effect. Movement of the process material between the slanting surfaces of the revolving wedge-shaped paddles generates shearing forces, which clean the paddle surfaces and maximize conductivity. Counter rotating shafts move the material away from the walls, cleaning the walls by means of the tab on each paddle. This results in higher heat transfer rates than disc or single shaft designs.
The wedge-shaped paddles, and the intermeshing of the dual agitators, create a localized mixing effect around the paddle. This allows more individual particles in the bed to be exposed directly to the heat transfer surface, thereby increasing the heat transfer rate, allowing the use of smaller equipment.
Technical parameters
| Model | KJG-2.7 | KJG-24 | KJG-52 | KJG-81 | KJG-110 |
| Heat transfer area | 2.7 | 24 | 52 | 81 | 110 |
| effective volume | 0.06 | 1.53 | 3.96 | 6.43 | 9.46 |
| revolution | 15-30 | 10-20 | 10-20 | 5-15 | 5-10 |
| power | 2.2 | 11 | 30 | 55 | 95 |
| width of dryer body | 306 | 1118 | 1474 | 1828 | 2210 |
| total width | 736 | 1474 | 1854 | 2286 | 2668 |
| length of dryer body | 1956 | 3454 | 5258 | 6020 | 6122 |
| total length | 2972 | 6147 | 8306 | 9678 | 9880 |
| distance between feeding and disharging | 1752 | 3150 | 4954 | 5562 | 5664 |
| height in center | 380 | 1066 | 1220 | 1220 | |
| total height | 762 | 2032 | 2464 | 2668 | |
| steam inlet | (2) 3/4 | (2) 1 | (2) 11/2 | (2) 11/2 | (2) 2 |
| water outlet | (2) 3/4 | (2) 1 | (2) 11/2 | (2) 11/2 | (2) 2 |
Applications
Petrochemical industry: polyolefin powder, polycarbonate resin, high and low-density polyethylene, linear low-density polyethylene, polyacetal granules, nylon 6, nylon 66, nylon 12, acetate, polyphenylene sulfide, propylene base resin, polypropylene, engineering plastics, polyvinyl chloride, polyvinyl alcohol, polystyrene, polyester, polyoxymethylene, styrene-acrylonitrile copolymerization, ethylene-propylene copolymerization.
Environmental protection industry: sludge, electroplating sewage
sludge, boiler soot, sugar factory waste residue, pharmaceutical
factory waste residue, MSG factory waste residue, coal ash.
Feed industry: soy sauce residue, bone-based feed, distiller's
grains, food scraps, apple pomace, orange peel, soybean meal,
chicken bone feed, fish meal, feed additives, bio-sludge.
Food industry: starch, cocoa beans, corn kernels, salt, modified
starch, medicines.
Chemical industry: soda ash, NPK compound fertilizer, kaolin,
bentonite, white carbon black, carbon black, phosphogypsum, calcium
sulfate, calcium nitrate, magnesium carbonate, sodium cyanide,
oxidized sodium fluoride, aluminum hydroxide, barium sulfate,
calcium carbonate, molecular sieves, dyes, saponins.
1) Low energy consumption: As a result of indirect heating, no much air take away the
heating, the outer wall has insulation layer, the heat efficiency
can be up to 90%. For slurry, evaporating 1kg of water just need 1.2kg vapor.
2) cheap investment: it has huge effective heat transfer surface area per unit, reduce treatment time,
let the machine size become small, so It greatly reduces the
construction area and building space.
3) wide range of materials handling: can use different types of media, not only can treat
heat-sensitive materials, but also handle high-temperature
materials. Common medias are: water vapor, thermal oil, hot water,
cooling water and so on.
4) flexible operation method: Can be continuous operation or intermittent operation, can be
applied in many fields.
5) Low environmental pollution: don't use air to dry material, dust material entrainment is rare.
Small solvent evaporation, easy to treat. For contaminated
materials or solvent recovery conditions, closed-loop can be used.
6) Cheap operating costs: Low-speed mixing and reasonable structure, Low wear, low
maintenance costs. For normal operation, just only 1 person / day.
7) Stable operation: Due to the special compression-expansion stirring of the wedge
blades, the material particle contact with the heat transfer
surface enough, it ensure the processing is stable.
