|
[China]
Trade Verify
Address: Room 303, Building 6, Central Zhigu Phase I, No. 189, Section 2, Renmin East Road, Changsha Area, China (Hunan) Pilot Free Trade Zone
Contact name:Jeffrey
Hunan GCE Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
The product RBMS07-S23-125A480V is a high voltage master Battery Management System (BMS) with an
embedded 3.5 inch screen and no parallel function. It is a two-wire
system, unlike the others that use a mid-line. It is suitable for
an application with a maximum current rating of 125A and a rated
voltage of 600V.
Advanced Battery Management System
The advanced battery management system is highly integrated and
performs seamless monitoring. It has a perfect self inspection and
operation status detection function. With a HMI display screen, the
system operations information is clearly visible. Reliable system
control and protection strategies further ensure the battery's
safety and extend its service life.
Modular Design, Configurable and Expandable
The battery management system has a modular design, making it
configurable and expandable. Multiple energy storage units may be
combined together to generate a larger energy storage system, which
can support up to 160 batteries in series. It is equipped with
various communication interfaces, such as RS485, CAN, Ethernet, and
dry contact input/output interfaces. It is compatible with most PCS
and monitoring servers on the market.
Flexible Communication Interface Protocol
The company’s communication protocol is programmed into the factory
settings. However, the PCS from different manufacturers can also be
adapted according to customer needs. It might also have a high
capacity memory chip to store key operation data, as well as an SD
card for storing historical data of the cell. Additionally, it has
automatic circulation control and automatic parallel/offline
control, which facilitates parallel connection of battery packs.
PV power plant storage is a useful tool for energy storage. It involves the use of solar panels to collect energy and store it for use at a later time. It is commonly used in island off-grid applications, as this type of energy storage ensures that power is available even when the sun is not shining. This is particularly beneficial in remote locations, where the lack of a direct grid connection can create significant challenges to energy storage.
PV power plant storage can also be used for optical storage charge integration applications. This application involves using solar panels to collect energy and then directing this energy into a battery for use at a later time. This type of energy storage is ideal for micro-grid applications, allowing energy to be stored in small, portable batteries. This same technology can also be used for UPS power supply and power system 220V DC power supply applications.
The EMS7000 Series offers a wide variety of basic parameters: a maximum current of 125A and 160A (optional), a maximum voltage of 350V and 600V (optional), power consumption of 15W or less, current sampling accuracy of 1%FSR, and insulation withstand voltage of 2800VDC with up to 1mA for 1 minute. With IP20 protection level, the product has a size of 482*132*500 mm and weights approximately 16Kg.
The EMS7000 Series also has several communication ports and can connect to a BMU (CAN), UPS (RS485/CAN) and SBMS (RS485/CAN). The EMS7000 also provides communication with monitoring software through an Ethernet connection. Basic functions such as battery charge & discharge management, battery temperature management and parameter settings are available, and the device also has short circuit protection (750V 20KA20ms). Other functions include precharge setting, parallel circulation control, event record (5000), DC power start option, insulation detection (for system voltage of 300V or higher), HMI display (3.5 inches screen embedded in BMS) and stand-alone or parallel mode settings.
The EMS7000 Series also has two dry contact outputs (optional) available, as well as an aesthetically pleasing RAL9005 black appearance. It can be installed in standard 19-inch racks and incoming and outgoing lines from the front side. It is suitable for operating temperatures between -20℃~60℃ and operating humidity from 5%-75%RH, and Exceeds national standards such as GB/T 16935.1 GB/T 17626.2 GB/T 17626.5. It also meets with CE certification standards for Safety Certification.
High Voltage BMS is shipped in a well-protected box that includes the following components:
The box is securely sealed to ensure that the contents remain safe during transit.
The package is shipped with reliable shipping services such as DHL, FedEx, UPS, etc. for prompt delivery to the customer.
