Home Companies Beijing HiYi Technology Co., Ltd

SP VirTis AdVantage Pro Benchtop Freeze Dryer For Laboratory Research Or Small Production Freeze Drying

Contact Us

Trade Verify

Address: Room 1302,Yufei Building, 42 Dongzhimenwai Street, Dongcheng District, Postcode:100027 Beijing,China

Contact name:Lisa Niu

Beijing HiYi Technology Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SP VirTis AdVantage Pro Benchtop Freeze Dryer For Laboratory Research Or Small Production Freeze Drying

City & Province	beijing beijing

Product Details

SP VirTis AdVantage Pro Laboratory Benchtop Freeze Dryer

OVERVIEW

The SP VirTis AdVantage Pro Freeze Dryer with Intellitronics™ Controller brings freeze dryers up to date, with ethernet compatibility so that you can monitor cycles from any terminal capable of receiving emails. With its touchscreen display and intuitive design, the AdVantage Pro represents the cutting-edge in freeze-drying. It’s versatile design allows tray and flask refrigeration, so it can be used for a large variety of applications - whether that’s freeze-drying bulk products or stoppered vials. Engineered using premium stainless steel, the reliable build quality ensures downtime is reduced and productivity is maximized.

FEATURES

Only 23 in (56.5 cm) wide, yet with 3 ft2 (2,766 cm2) of usable shelf area, the AdVantage Pro enables product to be safely processed using minimal bench space
Cascade refrigeration provides a -85°C large 6L capacity condenser coil, enabling lyophilization of a wide variety of products and solvents
Optimal heat transfer - silicone flooded shelves mean the AdVantage Pro maintains a precise level of temperature control (+/- 1.0 °C)
No more spillages - stopper vials automatically with the optional pneumatic stoppering option
Secure data storage and trending software option - ethernet-enabled for effortless data sharing
Integrated performance and leak testing - ensures the system is always working optimally
Fully customizable - up to ten thermal treatment and twelve drying steps for the ultimate recipe customization

APPLICATION

Laboratory Research & Development and/or Small Production Freeze-Drying
Diagnostic Kits
96 Well Plates
Serum Bottles & Vials
Bulk Products For Analysis – Plant Material, Organic Tissue, Waste Products

SPECIFICATION

Performance Specifications
	XL	EL
Shelf Temperature Control Range	-40 to 60 °C	-55 to 60 °C
Lowest Shelf Temperature (50 Hz / 60 Hz)	-57 °C / -60 °C	-62 °C / -65 °C
Shelf Pull-Down from 20 °C to -40 °C	≤ 40 minutes	≤ 30 minutes
Temperature Uniformity	± 1.0 °C	± 1.0 °C
Lowest Condenser Temperature (50 Hz / 60 Hz)	-67 °C / -70 °C	-82 °C / -85 °C
Maximum Condenser Capacity	6 L	6 L
Maximum Ice Condensing Capacity in 24 hours	4 L	4 L
Maximum Deposition Rate	0.17 L/hour	0.17 L/hour
Vacuum Rate of Rise	≤ 60 mT/hour (≤ 0.08 mbar/hour)	≤ 60 mT/hour (≤ 0.08 mbar/hour)
Number of Compressors	1	2
Compressor Horsepower	3/4	1/3, 3/4
Note: Performance specifications are based on SP Scientific test data from units operating at an ambient room temperature of approximately 20 °C. SP Scientific recommends an operating range of 15-25 °C (59- 77 °F)
Electrical Requirements
	XL	EL
Voltage	208-230 VAC	208-230 VAC
Hertz	50 / 60 Hz	50 / 60 Hz
Breaker Amperage (Type D)	15 A	15 A
Phase	Single	Single
Receptacle	6-15R (Domestic Only)	6-15R (Domestic Only)
Utility Requirements
	XL	EL
Compressed Air (Stoppering Option Only)	60 - 90 psig (4.1 - 6.2 bar)	60 - 90 psig (4.1 - 6.2 bar)
Approx. Peak Heat Generated (With Vacuum Pump)	5,000 BTU/h (1.5 kW)	7,000 BTU/h (2 kW)
Approx. Peak Heat Generated (Without Vacuum Pump)	4,000 BTU/h (1.2 kW)	6,000 BTU/h (1.8 kW)