Active Member
|
[China]
Address: No.106, north changjiang road, new district, wuxi china
Contact name:Jayson
Wuxi YBT Machinery Equipment Co.,Ltd. |
|
|
Aluminum foil material PU sandwich panel continuous production line
Aluminum foil PU sandwich panel line is an automatic production line,which is consisting of decoiler,film coating,pre-cutting equipment,roll forming machine system,preheating,foaming,solidification,band saw cuttinig,cooling,stacking and packiang.The whole line integtates technologies of mechanics,chemistry,eletrical control,hydraulic pressure pneumatic and temperature control.
Features
1. Beautiful and applicable,multiple functions,such as thermal isolation,sound isolation and flame retardence.
2. Using heated air recycle oven,strictly control the temperature of PU foaming and solidification in suitable range.
3. Using high pressure foaming system,precise measurement,high stabilith,little dust in locale,protect the worker's health.
4. Using 141B Or C5 as foaming agent.Insted of carbon chloral-fluoride,make the PU foaming treatment treatment become environmental production crafe.
5. Special double belt cojveyor,flat surface of sandwich panel,even thinckness,anti-patter n.
6. Operation system controlled by PLC computer,personal design and simple operation.
Plate type figure
Technical parameter
| Item | Parameter | |
| Material | Type | Color steel sheet;galvanized sheet;Aluminum sheet |
| Thinckness(mm) | 0.4-0.8 | |
| Width(Mpa) | ≤1250 | |
| Suitable size of panel | Length(mm) | 2000-16000 |
| Width(mm) | 600-1200 | |
| Thickness((mm) | 30-200(Not including height of corrugation) | |
| Production speed(m/min) | (Adjustable)3-8 | |
| Valid length of double belt conveyor(mm) | 16000-36000 | |
| Work pressure on pouring foam(Bar) | 150-200 | |
| Total power(kw) | Abouot 300 | |
| Total size(Length×Width×Height) | 130000×15000×6000 | |
Manual decoiler | 1). Material coil inner diameter: 450mm-550mm 2). Outer diameter:1500mm 2). Max coil width:1250mm 3). Carrying capacity: 5T |
| Forming device | 1) Shaft material:high grade No.45 steel after treatment 2) Out diameter is80 mm 3) Roller material: 45# steel polished and coated with chrome HRC55-60° 4) Forming speed:8-15m/min 5) Main motor power:3 kw 6) Roller station:16stations 7) Coil width: 1000/1200/1250mm 8) Effective width:950/1150mm 9). Voltage:380v,50Hz,3 phase |
| Hydraulic cutter | 1). material of blade: Cr12 mould steel with quenched treatment 55-60°C 2). cutting system: adopt advanced hydraulic drive, after forming automatic cut, no distort, no wasting , high safe factor.(main motor stop cutting) |
| Control system | 1.) Type: PLC Frequency Control System with touch screen 3). Encoder Brand: Omron 4). Screen: Delta test screen 5). Automatic length and quantity measurement 6). Control station is used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 7). Length Error: ±2mm, error is easy to adjusted. |
| Outpur table | It is simple and used to load finished product. Length:6m |
Spare Parts | 1). Easy damaged parts: conk 2 pcs, fuse-link 4 pcs 2). Rubber mat 1 pcs; 3). Bolt spanner 1 pcs |
