Active Member
|
[China]
Address: No.106, north changjiang road, new district, wuxi china
Contact name:Jayson
Wuxi YBT Machinery Equipment Co.,Ltd. |
|
|
The machine can produce various kinds of purlins, which can be used for major stress structure of the large and middle sized industrial constructions and civilian constructions, the roof load bearing and wall panel supporting of the plants,warehouses, engine houses, hangars, exhibition halls, cinemas, gymnasiums, fair flower stands, etc.
1. C purlin roll forming machine description:
C shape purlin is made by using the steel strip as the raw material, after Leveling, Rolling, Punching, Cutting, etc. become the final product. It can be used for the major stress structure of the large and middle sized industrial constructions and civilian constructions. The roof load bearing and wall panel supporting of the plants,warehouses, engine houses, hangars, exhibition halls, cinemas, gymnasiums, fair flower stands, etc.
YBT factory is producing the high quality C shape purlin roll forming machines, and exported to the foreign countries, such as Saudi Arabia, Singapore, India, Russia, Ethiopia, Angola, etc.
2. Main technical parameters of c purlin roll forming machine
| Main Technical Parameters | |||
| Item | Parameters | Notes | |
Suitable Material
| Type | Steel Sheet | |
| Thickness(mm) | 0.4--1.5 | ||
| Yield stress | 235Mpa | ||
| Product Specifications | Cover width | 100~300 | Detail as the client's drawing |
| Length | Any Length | ||
Power Requirement | Type | 380V/3PH/50HZ | |
| Main Motor Power(KW) | 22 | Depend on actual design | |
| Hydraulic Power(KW) | 7.5 | Depend on actual design | |
| Forming Speed(m/min) | 12-15 | Not include the time of punching and cutting | |
| Forming Stand | 18 | Depend on actual design | |
| Type of Cutting | Roll-formed and length-set cutting | ||
| Control System | Mitsubishi PLC and converter | ||
| Total Weight(T) | 8 | Depend on actual design | |
3. Main componets of z purlin roll forming machine:
| No. | Name | Unit | Qty |
| 1 | Decoiler | set | 1 |
| 2 | Entry Beach | set | 1 |
| 3 | Main Machine for roll forming | set | 1 |
| 4 | Cutting System | set | 1 |
| 5 | punching | set | 1 |
| 6 | Output Table | set | 1 |
| 7 | Control System(PLC) | set | 1 |
| 8 | hydraulic station | set | 1 |
4. C purlin roll forming machine flow charts:
Decoiler-- Roll Forming--PLC System—Hydraulic System –Pressing --Cutting —Output Table
5. Introduction of main components:
1). Decoiler
| Loading capacity | 5T |
| Uncoiling width | 1000mm |
| Inner diameter: | 450-550mm |
Usage:It is used to support the steel coil and uncoil it in a turnable way.
2). Feeding
| Material of axis | 45#steel |
| Number | 3 up,4 down |
| Diameter of axis | 100mm |
| Forming round | Material bearing steel (GR15), quenching 60-62 °C |
Usage:Put the raw material(steel plate) through the beach to manufacture and process,4 down and 3 up , it can guarantee that the products are neat, parallel and everything is uniformity.
3). Hydraulic cutting
| Main power: | 4kw |
4). Puching part:
| Power | 4kw (double valve) |
| Cylinder | 2 |
| Material: | Cr12 quenching |
| Quantity | 2 |
Usage: Punching is added to the flying saw cutting part, by the hydraulic control, mainly in the red c-shaped steel in the hole based, can be set up according to their needs, can be washed from time to punch, simple to use, the durability.
6. Our Advantages
· Germany COPRA software design
· 5 engineers with more than 20 years experience
· 30 professional technician
· 22 sets advanced CNC production lines on site
· Passionate Team
· Installation engineers can reach your factory within 6 days
· 3 years maintenance and whole life technical support
