Wuxi YBT Machinery Equipment Co.,Ltd. |
|
Strut Cold Roll Forming Machine , Steel Roll FormingMachine With CE Standard
The application of pv support system in solar panel support is much more than simple production and installation.
Solar panels can also move flexibly according to the sun's rays and seasons.
Like just when installation, the slope of each solar panels can be via mobile fasteners, cant adjust to adapt to the different angles of light, again through the fastening make solar panels accurate fixed in the location specified.
Raw Material: | Steel |
Material Thickness: | 2.0-3.0mm |
Motor Power: | 22 KW |
Voltage: | 380V/50Hz/3Phase |
Work Pressure: | 12Mpa |
Tolerance: | +-1.5mm |
Roller Groups: | 20 Roller Stations |
Drive System: | Chain Drive |
Roller Material: | Gcr15 Steel With Quenching |
Shaft Material: | 45# Steel |
Production Capacity: | 10-15m/min |
Dimension(L*W*H): | About 13000*1500*1670mm |
Weight: | About 14 Tons |
Control System: | PLC With Touch Scree |
PLC: | Panasonic Made In Japan |
Warranty: | 12 Months |
Working process:
Detailed information:
Decoiler
Inner Diameter: Φ500 – Φ550 mm
Out Diameter: 1000 mm
Max. Loading Capacity: 5000 kg
Type: hydraulic
Power:7.5kw
Control system: PLC
roll forming machine
Rolled Material: Cold Rolled Steel Sheet
Material Thickness: 1-2mm
Rollers: 22Groups
Material for Rollers: GCr15 steel after treatment
Hardness for Heat Treatment: HRC55 – 60
Frame panel thickness: 20mm
Bottom frame: 40# H-section steel
Motor Power:11 kw x2
Driven type: double sides double row 1.5"Chain
Punching device
Item | Parameter detail |
Frame processing | the whole levelling surface is made by drilling machine |
Mould material | Cr12mov |
Mould processing | wire eletrode-cutting for the mould shape, it will save pressure |
Hole size | According to your request |
Hole number | According to your request |
Pressure | 20Mpa |
Cutting device
Type | Pre-cutting |
Blade material | Cr12mov quenching and grinding |
Frame processing | the whole bottom frame is grinding for high-precision |
Blade processing | wire-electrode cutting, but the final product is clean after cutting, the the product shape this is technology |
Working | Hydraulic type
|
After sale services
1. Engineer will give free training lessons to labors in buyer’s
factory.
2. The Buyer will buy the round-trip air ticket for Engineer if
visa application is approved. The buyer is also responsible to bear
expenses generated, e.g. visa formalities, meals, accommodation and
allowance of USD80 for engineer per day.
3. During this guarantee period, we will provide spare parts
without any charge in case of quality discrepancy caused by us. If
the malfunctions are caused by your incorrect operations, we will
provide the buyer spare parts at cost price.
4. We will charge the buyer cost price of spare parts beyond 2
years and provide long-term technical guide.