Tellhow Technology (Chongqing) Co., Ltd. |
Verified Suppliers
|
|
ZZJ800 DC Motor For Rolling Mill Auxiliary Drive Motor For Steel Industry.
Product overview
ZZJ800 series rolling mill auxiliary drive motor.
Rated power: 3.75kw - 186KW
Rated voltage: Normal 400V, 220V
Speed: 360RPM/475RPM/675RPM/900RPM/
Protection class: IP23/IP44
Cooling method: IC01/IC06/IC17/IC37
Insulation class: F
one. Features and uses:
ZZJ-800 series rolling mill auxiliary drive motor is an important
power equipment in the iron and steel industry. Under the harsh
working environment, it can withstand frequent starting, frequent
reversible braking, and repeated large overload torque. It is
mainly used for work rolls. Road, pressing device, loop tension
roller, shearing machine, tong hoist and other equipment,
This series of motors has a circular structure with good heat
dissipation. It is used for rectifier power supply, and can
withstand the working conditions of pulsating current and rapid
current changes (load changes), and has good commutation.
This series of motors maintains the outline and installation
dimensions of the 600 series, and the power level is one level
higher than that of the 600 series, which is equivalent to the
international advanced level.
The insulation grade of the motor is F, and the reliable insulation
structure and impregnation process are adopted to ensure stable
insulation performance and good heat dissipation.
two. Motor performance
The data in the technical data sheet should work according to the
following conditions of use
a. The altitude does not exceed 1000 meters
b. The ambient air temperature is between minus 30 degrees and 40
degrees
c. The working environment should not contain acid, alkali or other
gases that are corrosive to insulation
d. The motor working system includes external ventilation
continuous working system (S1), fully enclosed short-time working
system S2, and fully enclosed intermittent periodic working system
S3 (load duration FC=30%)
e. The motor armature circuit and excitation circuit can be powered
by static rectifier power supply, and can also be powered by DC
generator.
f. The excitation ampere-turn ratio of the ventilated continuous
duty (S1) or fully enclosed short duty (S2) 1h time limit is about
50% other (parallel) ampere-turn and 50% series excitation
ampere-turn.
Each series of motors
Our aftersales service
Product packaging
Certifications