|
[China]
Trade Verify
Address: Huoju Industrial Park, National High-tech Zone,Jining ,Shandong Province,China.
Contact name:Hightop
Shandong Hightop Group |
|
Verified Suppliers
|
|
|
H800 Hydraulic Polyurea Spray Machine USA Car Bed Lining Polyurea Coating Pump
Description of Hydraulic Polyurea Spray Machine
PLC liquid crystal display,showing working status from time to time.
The static andd ynamic pressure difference is slight,the hydraulic station and the raw material pressure are designed with1:1,the pressure is stable,and the raw material output is large flow.
The booster pump is horizontally pressurized,booster faster and stable.
Features of Hydraulic Polyurea Spray Machine
1. Equipped with air cooling system to reduced oil temperature,
hence offer protection for the motor and pump and save oil.
2. Flat-mounted booster pump makes A and B material pumps
simultaneously,making sure pressure stability.
3. Equipped with emergency switch system, help operator deal with
emergencies rapidly;
4. Humanized design with equipment electrical operation panel,
super easy to get the hang of it.
Technical parameters of Hydraulic Polyurea Spray Machine
| Material use : closed cell and open cell 1:1 ratio, polyurea waterproof material 1:1 |
| Machine Power :18kw in total |
| Max pressure :25MPA |
| Power source :380V 50/60HZ |
| Air source:no less than 10 cfm,8 bar . |
| Net weight: 200kg |
| Machine Size :70*100*130cm . |
| HS:8477800000 |
| Remark :Standard machine include15 meters heated hose |
| Max support 120 meters heated hose |
Adhibitions of Hydraulic Polyurea Spray Machine
Polyurea Spray Machine can be used for various construction environment with spraying a variety of two-component spray materials and has been widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam,tanks,pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing, industrial maintenance,wear-resistant linings, cold storage insulation, wall insulation and etc.
Images of Hydraulic Polyurea Spray Machine
1. Work efficiency can reach 60% or more, far greater than the 20% efficiency of the pneumatic machine.
3.Working pressure up to 25MPA, and very stable, large displacement
per minute up to 24kg.
