Home Companies Suzhou Hengxie Machinery Co., Ltd

Copper Alloy Rod Breakdown Machine , High Durability Large Wire Drawing Equipment

Active Member

Contact Us

[China]

Address: No.27 Yinghu Road, Wangting Town, Xiangcheng District, Suzhou City, China

Contact name:

Suzhou Hengxie Machinery Co., Ltd

Copper Alloy Rod Breakdown Machine , High Durability Large Wire Drawing Equipment

Country/Region china
City & Province suzhou jiangsu

Product Details

400/13DL Copper wire rod breakdown machine

 

I. Quick description

 

      HXE-400/13DL Copper wire rod breakdown machine is used to draw single bare copper/alloy wire from 8mm to 1.2mm-3.5mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control can be matched with each other.

 

II. Compositions of equipment

 

NameQuantity
1. Pay-off shelf1
2. HXE-400/13DL Main drawing machine1
3. HXE-180 Tension controller1
4. HXE-SX630 Double spooler1
5. Electrical cabinet1
6. Operation panel1
7. User manual, Inverter instruction, Installation layout 
8. Spare parts 

 

III. Main technical parameters

 

1. Inlet8mm
2. Outlet1.2mm-3.5mm
3. Diameter of capstans400mm
4. Speed1200m/min
5. Slip ratio1.238
6. Quantity of capstan13
7. CapstanTungsten carbide
8. Quick dies changeAvailable
9. Main motorDC 200KW
10. Fix speed motorDC 55KW
11. GearChangeable
12. Noises of machine≤85 db
13. Protection coverInstalled
14. Lubrication system1 set

 

IV. Operating procedures

 

4-1. Open power switch

4-2. According to the wire diameter, choose the dies (Check the die list).

4-3. Use pliers to break the wire to get a smaller section.

4-4. Use pliers to make the wire through the dies, then pull the wire out (Use foot switch to make the machine running in a low speed to make the wire move).

4-5. Wire direction, please check the Drawing for Wire path.

4-6. After make the wire through all the parts, close the annealing door and the spooling door, make the tension swing arm in the lowest position. and in running, the balance arm should be in the horizontal line. No big shake, no up and down frequently.

4-7. Open the Annealing switch, open the Pump, open and adjust the Drawing lubrication oil, Cooling water, Steam, Compressed air.

4-8. Set the length meters, then press the Start button to start the machine.

 

 

V. Advantage and after-sale service

A: Advantage

 

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

 

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

 

Hot Products

HXE-13DLA Aluminium rod breakdown machine with Annealer , Double spoolers I. Quick details HXE-13DLA ...
HXE-13DL Copper rod breakdown machine I. Quick Details HXE-13DL Copper rod breakdown machine is used ...
400/13DL Copper wire rod breakdown machine I. Quick description HXE-400/13DL Copper wire rod ...
HXE-400/13DL aluminium wire rod breakdown machine I. Application HXE-400/13DL Aluminium rod ...
HXE-400/13DL aluminium wire rod breakdown machine I. Quick Details HXE-400/13DL Alinimium rod ...
400/13DL Copper Wire rod breakdown machine I. Application of machine HXE-400/13DL Copper wire rod ...