Suzhou Hengxie Machinery Co., Ltd |
|
13 DLA Copper Rod Breakdown Machine with annealer
HXE-13DLA Copper rod breakdown machine
with annealer is used to draw and anneal single bare copper wire
from 8.0mm to 1.4mm-4.0mm.
I. components
1. Pay-off shelf | 1 set |
2. HXE-13DLA Copper rod breakdown machine | 1 set |
3. HXE-TH300 Annealing machine | 1 set |
4. HXE-180 Tension controller | 1 set |
5. HXE-SX630 Double spoolers | 1 set |
6. HXE-WF650 Coiler | 1 set |
7. Electric cabinet | 2 set |
8. Operation panel | 1 set |
9. Gear Oil Pump & Cooler | 1 set |
10. Steam generator | 1 set |
11. Spare parts | 1 set |
II. Parameter
1. Inlet wire diameter 8.0mm
2. Outlet wire diameter 1.4mm-4.0mm
3. Line speed 500m/min;
4. Number of Dies 13
5. Drum speed ratio 1.25
6. Capstan Iron cast, With Tungsten Carbide surface, 650mm, 4
pieces
7. Machine frame Welded
8. Main motor AC 132KW
9. Spooler motor AC 15KW
10. Coiler motor AC 11KW
11. Inverter Inovance Brand
12. Speed adjust by Inverters
13. Transmission by Gear&Triangle Belts
14. Cantilever type pay-off shelf
15. Free rod type traversing
16. Power source customized
17. Annealing voltage 50V
18. Annealing current 2500A
19. Annealing power 125KVA
20. Annealing type D.C. Two section annealing
21. Annealing speed control by Inverters , auto tracking the
drawing speed
III. Notes
When installation, make connect the ground wire.
When working, do not open the doors.
Do not touch the wire when annealing.
Regular check Coolant water, Steam, Compressed air.
IV. Working environment
Altitude less than 1000m.
Temperature: -10℃-40℃
Relative temperature less than 85% (25℃)
Power source 380V, 50Hz, can be customized
V. Advantage and after-self service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will
not take responsibility, but if the Buyer agree, will charge fees
accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the
machine.
C. Due to Buyer`s wrong operation that may cause damage to the
machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer
should inform Seller in letter form to repair in seven days, If
beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning,
typhoon, earthquake, riots, war, fire or flood) and other factors
that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts
and teach. After warranty, will charge accordingly.