Suzhou Hengxie Machinery Co., Ltd |
|
400/13DL Copper/Copper Alloy rod breakdown machine
I. Quick description
HXE-400/13DL Copper/Copper Alloy rod breakdown machine is used to draw single bare copper/alloy wire from 8mm to 1.2mm-3.5mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control can be matched with each other.
II. Compositions of equipment
Name | Quantity |
1. Pay-off shelf | 1 |
2. HXE-400/13DL Main drawing machine | 1 |
3. HXE-180 Tension controller | 1 |
4. HXE-SX630 Double spooler | 1 |
5. Electrical cabinet | 1 |
6. Operation panel | 1 |
7. User manual, Inverter instruction, Installation layout | |
8. Spare parts |
III. Main technical parameters
1. Inlet | 8mm |
2. Outlet | 1.2mm-3.5mm |
3. Diameter of capstans | 400mm |
4. Speed | 1200m/min |
5. Slip ratio | 1.238 |
6. Quantity of capstan | 13 |
7. Capstan | Tungsten carbide |
8. Quick dies change | Available |
9. Main motor | DC 200KW |
10. Fix speed motor | DC 55KW |
11. Gear | Changeable |
12. Noises of machine | ≤85 db |
13. Protection cover | Installed |
14. Lubrication system | 1 set |
IV. Working environment
4-1. Altitude less than 1000m.
4-2. Temperature: -10℃-40℃
4-3. Relative temperature less than 85% (25℃)
4-4. Power source 380V, 50Hz, can be customized
V. Shipping & Installation
5-1. Shipping
There are two lifting rings on the drawing machine, four on then annealing machine.
5-2. Installation (See attached drawing)
According to the drawing, make the foundation.
When machine is in position, install bolts and adjust the center line.
When concrete is drying, adjust center line again and fix the bolts.
5-3. Adjust
Before adjusting, check and clean all parts.
VI. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.