Active Member
|
[China]
Address: No.27 Yinghu Road, Wangting Town, Xiangcheng District, Suzhou City, China
Contact name:
Suzhou Hengxie Machinery Co., Ltd |
|
|
HXE-17DS Intermediate copper wire drawing machine
I. Quick description
17DS Intermediate copper wire drawing machine is used to drawing copper wire from 2.6mm-3.5mm to 0.4mm-1.6mm.
II. Compositions of equipments
| Name | Quantity |
| 1. Pay-off shelf | 1 set |
| 2. HXE-17DS Main drawing machine | 1 set |
| 3. HXE-180 Tension controller | 1 set |
| 4. HXE-WS630 Single spooler | 1 set |
| 5. Electric cabinet | 1 set |
| 6. Operation panel | 1 set |
| 7. Accessories | |
III. Main Technical parameters
1. Usage: Bare copper wire drawing
2. Inlet diameter: 2.6mm-3.5mm
3. Outlet diameter: 0.4mm-1.6mm
4. Speed: 0.7 -0.4mm,2000-1400mpm; 1.0 -0.7mm, 1200-1000mpm, 1.6-1.0mm, 900-1000mpm
5. Die Nos.17 pieces/Max, 30mm-15mmT or 25mm-10mmT, the finished die 25mm-10mmT
6. Decrease section ratio of m/c:20%+15%
7. Frame: Iron cast
8. Capstans: Ceramic Tungsten, 4-tier unity
9. Capstan diameter:250mm
10. Final capstan diameter:250mm
11. Main motor: AC 3 phase 55KW, controlled by inverter independently.
12. Take up motor:AC 3phase 11kw,controlled by inverter independently.
13. Take up capacity:250kg for diameter 500mm iron spool ,Max. weight 500kg for 630mm spool.
14. Spool size:diameter500mm-630mm/Max (customize)
15. Traverse motor: 90W reversible motor control, transmission by timing belts
16. Transmission type: by precious gears
17. Reverse system: PID synchronous control spool
18. Detective device: air tension control
19. Brake: Disc brake
20. Capstan lubrication:full immersion
21. Lubrication capacity: 120L/min
15. Machine dimension(L*W*H):2100*1022*995mm
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
V. Maintenance
Lubricate all the parts, make sure all the wheels and capstans run flexible.
After working 1000hours, clean all the bearing and change new lubrication oil.
Annealing contact rings are consuming parts, after using for certain time, when annealing, will have sparks, which means you need change new rings.
There are carbon brushes on the back side of the annealer machine, need change accordingly.
VI. Notes
1. When installation, make connect the ground wire.
2. When working, do not open the doors.
3. Do not touch the wire when annealing.
4. Regular check Coolant water, Steam, Compressed air.
