Active Member
|
[China]
Address: No.27 Yinghu Road, Wangting Town, Xiangcheng District, Suzhou City, China
Contact name:
Suzhou Hengxie Machinery Co., Ltd |
|
|
HXE-14DT Copper fine wire drawing machine with continuous annealer
I. Application
HXE-14DT Copper Fine wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.25mm-0.6mm.
II. Main Technical parameters
1. Usage: Fine copper wire drawing and annealing
2. Inlet diameter: 0.8mm-1.6mm
3. Outlet diameter: 0.25mm-0.6mm
4. Max. mechanical speed: 1500m/min
5. Dies: 14 dies
6. Slip ratio: 15%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 15KW, Inverter control
8. Take up motor: AC 3 Phase 5.5 kw, Inverter control
9. Take up capacity: 50kg for diameter 300mm iron spool (Customize)
10. Spool size: Diameter 300mm/Max (Customize)
11. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan
268mm
12. Capstan lubrication: Water pipe spray
13. Traversing: 110W synchronous motor,transmission by timing
belts.
14. Brake: 20KG-M Electromagnetic brake
15. Air pressure: 4-6kg/cm2
16. Annealing pulley: Diameter 120mm
17. Annealing volt: DC50V
18. Annealing current: DC600A
19. Annealing motor power: 30KVA
20. Power source: (customize)
21. Spool control: PID
22. Tension control: Weight balance
23. Machine dimension(L*W*H): 2600mm*1600mm*1900mm, Machine
weight:3200kg
III. Components
| Name | Quantity |
| 1. Pay-off stands | 1 set |
| 2. HXE-14DT main drawing machine | 1 set |
| 3. Electrical control system | 1 set |
| 4. Bobbin unloading device | 1 set |
| 5. Steam generator | Optional |
| 6. Lubrication Tank and Pump | Optional |
| 7. Spare parts | As per List |
| 8. Others |
IV. Advantage and after-self service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
V. Working Condition
5-1. Maximum air consumption 0.3 cubic meter per minute
5-2. Compress air capacity 225L
5-3. Air pressure 0.4Mpa
5-4. Cooling tank capacity 225L
5-5. Steam capacity 2kg/hour
5-6. Steam pressure 0.2-0.3Mpa
VI. Preparation before working
6-1. Check all parts lubrication conditions,
6-2. Check drawing lubrication oil, cooling water, steam, air pressure.
6-3. After checking, connect to power, according to the Electrical drawing, use foot switch, to make the machine operating in low speed (under 4m/s), if no Abnormal, then can begin to work.
