Home Companies Suzhou Hengxie Machinery Co., Ltd

Industrial Fine Copper Wire Drawing Machine With Double Spoolers Easy Maintenance

Active Member

Contact Us

[China]

Address: No.27 Yinghu Road, Wangting Town, Xiangcheng District, Suzhou City, China

Contact name:

Suzhou Hengxie Machinery Co., Ltd

Industrial Fine Copper Wire Drawing Machine With Double Spoolers Easy Maintenance

Country/Region china
City & Province suzhou jiangsu

Product Details

HXE-22DT Fine copper wire drawing machine with Annealing and Double spoolers

 

I. Application

   

   22DT Fine copper wire drawing machine with annealing and double spoolers is used to draw and annealing single bare copper wire from 0.8mm-1.4mm to 0.1mm-0.6mm.

 

II. Main Technical parameters

 

1. Usage single bare copper wire drawing and annealing

2. Inlet size Ф0.8mm-Ф1.4mm

3. Outlet size Ф0.1mm-Ф0.6mm

4. Machine speed/max 1500m/min

5. Die number 22, Dies size 25mm×8-10mmT, Slip ratio 15.5%+8%

6. Wire drawing mode standing-mode and 4axes

7. Drive: by Inverter control, Brand Inovance, Chinese famous brand.

8. Main motor 15KW, Spooler motor 5.5KW*1set/2sets

9. Annealing voltage DC55V/max

10. Annealing current DC600A/max

11. Annealing power 33KVA

12. Annealing method D.C three-section annealer

13. Quantity of steam 8kg/h

14. Capacity of compressed air 0.4-0.6Mpa,15L/min

15. Demand Water quantity for annealing and coolant 150L/min

16. Machine frame welded by steel plate

17. Transmission By Timing belts

18. Capstan ceramic plasma

19. Lubricating system Spray

20. Bobbin size 300mm, loading capacity :50kg/max (Can be customized)

21. Bobbin loading &unloading type shaft type

22. Traversing unit 110W synchros motor, width: 270mm/max

23. Bobbin controlling Fixed by Screw

24. Brake 20KG-M magnetic brake

25. Operation panel &control cabinet 1000×800×1800mm

26. Machine dimension 2100mm*1600mm*1700mm

27. Machine weight 3200KG

 

III. Components

 

NameQuantity
1. Pay-off shelf1 set
2. HXE-22DT Drawing&Annealing machine1 set
3. Electrical control system1 set
4. Steam generator1 set
5. Lubrication Tank and PumpOptional
6. Spare partsAs per List
7. Operation Manual, Inverter Manual

 

 

 

 

IV. The structure and principle of the machine

 

4-1. The annealing part, is three-section annealing, consist of Preheating section, annealing section and drying section. The fix speed capstan of drawing, the annealing capstans, are driven by the same motor, through belts, so the speed of drawing, speed of annealing, is the same, make sure no wire break.

4-2. The annealing capstans, are access to positive and negative power, make the wire pass through the annealing capstans with current, by short-circuiting, to preheat, anneal and dry.

4-3. The annealing current and voltage, by auto tracking the drawing speed to auto adjust.

4-4. To cooling fast to achieve the annealing, the annealing capstan is under the cooling water. There is a cooling tank at the bottom of the machine, cooling water, better use fat content of 0.5% emulsion. The pump shall pump the cooling water through the pipe and the switch to the annealing door. Adjust the cooling water switch to make sure the water is in certain height.

4-5. To make sure the wire while annealing, no Oxidation, there is a steam-in protection pipe, connect the pipe to the Steam generator, to use the steam to protect the wire from the oxidation.

4-6. In the exit of the drying section, there is a blowing device. In the device, shall have two dies. Connect the air compressor to the air compress input pipe, then out by the blowing device, adjust the switch, to make all the left water of the drying part, on the surface of the wire, blow away.

 

 

 

V. Advantage and after-sale service

 

A: Advantage

 

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). DC. three-section annealing

(4). Our company’s developing process in more than 10 years.

 

B: After-sale service

 

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

 

       Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

1. Due to wrong operation while shipping.

2. Due to Buyer`s wrong preparation that may cause damage to the machine.

3. Due to Buyer`s wrong operation that may cause damage to the machine.

4. Not in the consuming part list.

5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

 

Hot Products

400/13DL Copper/Copper Alloy rod breakdown machine I. Quick description HXE-400/13DL Copper/Copper ...
HXE-400/13DL Copper rod breakdown machine with annealer I. Application HXE-400/13DL Copper rod ...
HXE-13DLA Aluminium rod breakdown machine with Annealer , Double spoolers I. Quick details HXE-13DLA ...
HXE-13DL Copper rod breakdown machine I. Quick Details HXE-13DL Copper rod breakdown machine is used ...
400/13DL Copper wire rod breakdown machine I. Quick description HXE-400/13DL Copper wire rod ...
HXE-450/13DL Copper rod breakdown machine I. Application HXE-450/13DL Copper rod breakdown machine ...