Active Member
|
[China]
Address: Room 808, No. 578, Tianbao Road, Hongkou District, Shanghai, China
Contact name:James Liu
Shanghai Qilong High Pressure Container Co., Ltd. |
|
|
High And Low Pressure Gauge Nitrogen Cylinder Regulator , Gas
Cylinder Pressure Regulator
Description:
Functions:
1 the pressure relief function is stored in the gas cylinder
through the pressure reducer, to
achieve the required working pressure
2 the high and low pressure gauge of the pressure reducing pressure
regulator respectively
indicates the pressure value of the pressure and the pressure in
the bottle.
| Model | Service Medium | Max Inlet Pressure | Adjusting pressure | Nominal Flow Rate | Inlet Connection | Outer Connection |
| YQD-01A | Nitrogen | 15Mpa | 0.1~0.16mpa | 60m3/h | G5/8" | M16×1.5 |
| Model | Service Medium | Max. entrance pressure | Max. discharge pressrue | Nominal Flow Rate | Inlet Connection | Outer Connection |
| YQY-740L | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(F) | M12×1 -RH(F) |
| YQY-740Lc | Oxygen | 15Mpa | 0.20.3Mpa | G5/8"-RH(M) | M12×1 -RH(M) | |
| YQY-740LE | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(M) | M12×1 -RH(M) |
| YQY-740LS | Oxygen | 15Mpa | 0.20.3Mpa | 115L/min | G5/8"-RH(F) | M12×1 -RH(F) |
| YQY-740LB | Oxygen | 15Mpa | 0.20.3Mpa | 115L/min | G5/8"-RH(M) | M12×1 -RH(M) |
| YQY-740LW1 | Oxygen | 15Mpa | 0.20.3Mpa | 115L/min | G5/8"-RH(M) | M12×1 -RH(M) |
| YQY-740LW2 | Oxygen | 15Mpa | 0.20.3Mpa | 115L/min | G5/8"-RH(M) | M12×1 -RH(M) |
| YQY-740LW3 | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(F) | M12×1 -RH(M) |
YQY- | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(M) | M12×1 -RH(M) |
| Type | Medium | Inlet Pressure Mpa | Adjusting Range | Nominal Flowrate m3/h | Inlet Connection | Inlet Connection |
| YQ-10L | O2 | 0.20.3 | 0.20.3 | 110L/min | M10×1 | nasal oxygen cannula |
| YQY-740Z | O2 | 15 | 0.20.3 | 10L/min | PZ19.2 | nasal oxygen cannula |
| YQY-740Z1 | O2 | 15 | 0.20.3 | 10L/min | PZ27.8 | nasal oxygen cannula |
| YQY-740H | O2 | 15 | 0.20.3 | 10L/min | G5/8 | nasal oxygen cannula |
| Type | Nominal Diameter(mm) | Nominal Water Capacity(L) | Service Pressure(Mpa) | Test Pressure (Mpa) | Filling Gas(L) | material |
| GY108-1.4 | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(F) | M12×1 -RH(M) |
| GY108-2 | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(F) | M12×2 -RH(M) |
| GY108-3 | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(F) | M12×3 -RH(M) |
| GY140-4 | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(F) | M12×4 -RH(M) |
| GY159-10 | Oxygen | 15Mpa | 0.20.3Mpa | 110L/min | G5/8"-RH(F) | M12×5 -RH(M) |
| Model | Service Medium | Max Inlet Pressure | Adjusting Pressure | Power Source | Nominal Flow Rate | Inlet Connection | Outer Connection |
| YQT-01A | Carbon dioxide | 15Mpa | 0.010.25Mpa | 5m3/h | G5/8" | M16×1.5 | |
| YQT-191 | Carbon dioxide | 25Mpa | 36220V | 025LPMco2 | G5/8"-RH(F) | M16×1.5RH (M) | |
| YQT-341 | Carbon dioxide | 15Mpa | 0.010.6Mpa | 25L/min | G5/8" | M16×1.5 | |
| YQT-341L | Carbon dioxide | 15Mpa | 0.30.35Mpa | 225L/min | G5/8"LH(M) | G3/8"LH(M) | |
| YQT-731L | Carbon dioxide | 15Mpa | 0.20.3Mpa(Setting) | 36220V | 25L/min | G5/8" | M12×1 |
| YQW-01A | Propane | 15Mpa | 0.010.05Mpa | 5m3/h | M22×1.5-Left | M22×1.5-Left |
| Model | Service Medium | Max Inlet Pressure | Adjusting Pressure | Nominal Flow Rate | Inlet Connection | Outer Connection |
| YQAr-731 | Argon gas | 15Mpa | 0.15Mpa (Setting) | 25L/min | G5/8" | M12×1 |
| YQAr-731L | Argon gas | 15Mpa | 0.15Mpa (Setting) | 25L/min | G5/8" | M12×1 |
| YQAr-731L1 | Argon gas | 15Mpa | 0.15Mpa (Setting) | 25L/min | G5/8" | M1×1 |
| YQD-01A | Nitrogen | 15Mpa | 0.10.16Mpa | 60m3/h | G5/8" | M16×1.5 |
| YQQ-01A | Nitrogen | 15Mpa | 0.010.25Mpa | 40m3/h | Φ28×14 Teeth/inch-left | M16×1.5-Left |
| YQA-441 | Ammonia | 3Mpa | 0.4Mpa | 15m3/h | G1/2" | M16×1.5 |
| Model | Service Medium | Max Inlet Pressure | Adjusting Pressure | Nominal Flow Rate | Inlet Connection | Outer Connection |
| YQY-01 | Oxygen | 15Mpa | 1.5Mpa | 40m3/h | G5/8" | M16×1.5 |
| YQY-01A | Oxygen | 15Mpa | 0.11.25Mpa | 40m3/h | G5/8" | M16×1.5 |
| YQY-1A | Oxygen | 15Mpa | 0.12Mpa | 50m3/h | G5/8" | M16×1.5 |
| YQY-11 | Oxygen | 15Mpa | 0.11.6Mpa | 100m3/h | G5/8" | G5/8" |
| YQY-370 | Oxygen | 15Mpa | 0.44Mpa | 16m3/h | G5/8" | M16×1.5 |
| YQE-01 | Dissolved acetylene gas | 3Mpa | 0.15Mpa | 5m3/h | G5/8" | M16×1.5 |
| YQE-01A | Dissolved acetylene gas | 3Mpa | 0.010.15Mpa | 5m3/h | frame (flange) | M16×1.5-Left |
| YQEG-224 | Dissolved acetylene gas | 3Mpa | 0.010.15Mpa | 40m3/h | Φ14mm | Φ14mm |
Product advantage:
Applicable to non corrosive gases such as ammonia, oxygen,
nitrogen, argon gas etc.
1 low price.
2 compact and lightweight.
3 dead volume small easy to sweep the replacement.
4 smooth pressure adjustment.
5 have a variety of interface.
Company advantage:
1. Payment protection.
2. On-time shipment.
3. Product quality production.
We take great pride in our work and in the wide variety of products
that we offer. We are
experienced in servicing the US market, European market and Africa
market .Please be aware
that our production lead times depend on specific items and item quantities. Our success has
been based on our understanding of the demands and nature of promotional and marketing
deadlines. That is Why we always ensure that every order
is delivered on time.
